K104 on the way......


Jennifer and Julie have similar levels of enthusiasm. I’m pretty sure Julie was more excited at the delivery than she was on our wedding night.

Tip: put nylon spacers behind the license plate mounting screws so the plate isn’t resting directly on the carbon fiber valance. Or, if you’re Mal or Texas Mongrel, carbon fibre. $4 mod.
 
Or metal, for the heat (what I used)

Tip: put nylon spacers behind the license plate mounting screws so the plate isn’t resting directly on the carbon fiber valance.
 
Congrats! Well deserved!
 
Congrats!
 
Congrats Paul!! That’s one huge smile my friend
 
Congratulations!! I can honestly say that that is the ultimate NFGT livery and hope one day soon to share the experience. Drive in good health.
 
Absolutely gorgeous. Congrats
 
Or metal, for the heat (what I used)

What interior bits are you putting clear film on other than the sills and footwells?
 
Center spine (between the seat belt buckles) pedal box, passenger "foot rest" come to mind.

BTW 4 nuts, seat bottom comes out, then that exposes 2 torx bolts to remove the entire door sill piece. Makes it easier to more fully wrap.
 
  • Like
Reactions: maxemus and Ed Sims
What interior bits are you putting clear film on other than the sills and footwells?
Center spine (between the seat belt buckles) pedal box, passenger "foot rest" come to mind.

BTW 4 nuts, seat bottom comes out, then that exposes 2 torx bolts to remove the entire door sill piece. Makes it easier to more fully wrap.

All good to know. Thanks Andy.
 
Congratulations Paul and Julie, what an amazing looking car. Love the gulf coloured plates and napkins too! See you soon x
 
Paul, what a ride. Congratulations and enjoy buddy.
 
I put a sticker on it and took it to Home Depot. It’s a keeper.
72F43F12-2FE7-4D51-B5F6-035F81C4E6B3.jpeg353CA3FD-E267-495A-A443-7E7F9AFD2075.jpeg
 
  • Like
Reactions: DakotaGT
bet all the contractors werent expecting the impromptu car show

nicely done.
 
You get mobbed no matter where you take that car!
 

Attachments

  • 2FD343FA-4374-456A-AE98-507F0BB50888.jpeg
    2FD343FA-4374-456A-AE98-507F0BB50888.jpeg
    199.3 KB · Views: 26
Not gonna lie, I love it. Transmission is awesome. The car makes crazy noises. I hope to be at the break in mileage before Tuesday.
 
I put a sticker on it and took it to Home Depot.

If I get to drive it, I'm taking it to Harbor Freight.
 
If I get to drive it, I'm taking it to Harbor Freight.

😂
You will drive it, but there is no way in hell I’m letting you take it to that Chinese outlet.
 
  • Like
Reactions: 68Rcodeman