Introductions to Tecnocraft Composites


Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
Produced to the highest standards, The Tecnocraft Pre Preg Carbon fiber program is very different from most other Carbon Fiber products available. Made entirely of Pre-Preg Composite, our carbon fiber pieces are often described as “artwork for exotics.” Our highly skilled team of fabricators and designers pride themselves on the years of experience building trophy winning race cars in prior lives and being able to apply it to everyday road going exotics here with Tecnocraft. With a strong team of former professional race car fabricators, you can expect Tecnocraft to give more consideration to weight reduction and strength than pretty much anybody else in the industry. Everything made here at Tecnocraft, is 100% made here in the USA.


The Tecnocraft Ford GT carbon program is unmatched by anything offered by the competition. Using the best pre-preg carbon fiber materials available, Tecnocraft only produce pieces to the highest standards. The Ford GT is a truly exceptional vehicle. In our opinion, the Ford GT is one of the best cars to be born out of Detroit. A vehicle with such a strong racing heritage deserves nothing less than the best available pre-preg carbon fiber.

61.jpg
 
Last edited:

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
38.jpg

39.jpg

40.jpg

41.jpg

42.jpg

43.jpg

44.jpg

45.jpg


Available for immediate delivery. Introductory discounts to Ford GT Forum members. $2995.99 MSRP before discount

The Tecnocraft Ford GT Carbon Fiber Side Diffusers were designed to accentuate the long wheelbase and adds down force by creating a wider base platform which results in a higher vacuum condition at increased speeds. It’s a well known design principle in professional racing that we have been able to apply to the Ford GT. Using the exact same manufacturing process as the Tecnocraft Ford GT Front Splitter/Diffuser, the Side Diffusers are lightweight and sturdy pieces designed to withstand the highest speeds and flows very well between the front splitter and rear diffuser. If we felt that the factory piece was sufficient, we would not have spent the time to engineer and produced these.

Tan@tecnocraft.com
 
Last edited:

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
We were inspired by the team at Joyride.
36.jpg
 

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
Tecnocraft Composites front diffuser/splitter

21.jpg

23.jpg

22.jpg


The Tecnocraft Composites pre-preg carbon front splitter/diffuser is our signature design element for the Ford GT. Made to withstand speeds of 200+mph, the Tecnocraft front Splitter/diffuser is a honeycomb reinforced pre-preg carbon fiber masterpiece that’s strong enough to run the fastest tracks anywhere in the world. Designed to increase frontal down force resulting in better tire grip, we made this front splitter/diffuser to take the harshest of road conditions and improve the looks of your Ford GT. Utilizing factory mounting points, the installation of this piece is a simple process and can easily be reversed if you feel the need to turn your car back to stock form again.

Available now in clear coat or matte finish. Contact me for special pricing to Ford GT forum members. $2995.99 MSRP before discount
 
Last edited:

Fubar

Totally ****** Up
Mark II Lifetime
Le Mans 2010 Supporter
Aug 2, 2006
3,979
Dallas, TX
Very nice work, welcome to the board.
 

STORMCAT

GT
Mark IV Lifetime
Le Mans 2010 Supporter
May 25, 2006
7,551
Ft. Lauderdale
Welcome. Nice looking stuff !! :thumbsup
 

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
9.jpg

10.jpg

11.jpg

12.jpg

13.jpg


The Tecnocraft Ford GT Carbon Side Scoops are made from pre-preg carbon fiber and clear coated to a high luster finish. They are lighter than the factory piece and are that must have exterior upgrade that sets your FORD GT apart from all others. It’s a highly visible piece that blends aerospace with racing and has been applied seamlessly to the Ford GT.
It makes a very nice visual statement about the exotic composite material used in your Ford GT, wherever you take it.

$2695.99 MSRP before Ford GT forum member discount.
 
Last edited:

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
15.jpg

16.jpg

17.jpg

18.jpg

19.jpg


The Tecnocraft Ford GT Rear Window Garnish upgrade is a 3 piece assembly that is a nice subtle upgrade from the factory plastic pieces that are prone to heat warping.
The Ford GT’s mid-engine compartment is a beautifully laid out mechanical masterpiece in itself… The Tecnocraft Rear Window Garnish is more or less that perfect “picture frame” for that perfect “work of art.” There is not a better way of showcasing your engine bay.

Also available now and it too, will make your exclusive Ford GT even more so..

$2495.99 MSRP before Ford GT Forum member discounts
 
Last edited:

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
Very nice work, welcome to the board.

Thank you, we are on Facebook if you like to see pictures of the Ford GT at SEMA 2010.
 

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
Welcome. Nice looking stuff !! :thumbsup

Thank you, we want to fabricate a whole lot more for the Ford GT.
 
H

HHGT

Guest
Welcome to the Forum. Very nice work.

BTW, what is your opinion on Carbon Fiber Wheels for the GT? Dangerous at high speeds?
 

Chris A.

GT #32
Mark II Lifetime
Feb 6, 2007
1,233
Ortega Mountain, CA
Welcome.....Maybe a FGT open-house is in order for us locals:biggrin
 

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
Yes, an open house tour of the warehouse, fabrication studio, CNC machine area, and carbon fiber factory would be ideal.

Tan
 

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
Welcome to the Forum. Very nice work.

BTW, what is your opinion on Carbon Fiber Wheels for the GT? Dangerous at high speeds?

We love the look since we are carbon fiber fanatics here but we have not progress further with this project.
 

nota4re

GT Owner
Mark IV Lifetime
Le Mans 2010 Supporter
Feb 15, 2006
4,192
How 'bout posting some prices?
 

Tecnocraft

Well-known member
Sep 29, 2010
91
Pico Rivera, CA
How 'bout posting some prices?

Done, I did not know if that was allowed in the forum.
 

nota4re

GT Owner
Mark IV Lifetime
Le Mans 2010 Supporter
Feb 15, 2006
4,192
Thank you, sir! Your products look fantastic!
 

MK2_GT

GTX1 Owner
Mar 25, 2006
795
The products look great! Welcome to the forums.
 

timcantwell

Le Mans 2010 Sponsor * Moderator
Mark IV Lifetime
Le Mans 2010 Supporter
Jan 22, 2006
2,634
N.E. OH & Naples, FL
Welcome to the forum. Shane (AZSTAD) has spoken very highly of you. I look forward to meeting you soon.
 

shelbyelite

PERMANENTLY BANNED
May 10, 2007
1
Nice stuff. Will be calling you to see about offering your products to our customers. :)