Definitive Wheel and Tire Thread with Pics


tmcphail

GT Owner/Vendor
Mark IV Lifetime
Apr 24, 2006
4,102
St Augustine, Florida
AZGT: please put me down for a set of those centercaps. I have a set of powdercoated flat black base wheels....and have been thinking about a custom centercap myself.

Regards,

Sanjay

Hey got any pics of your black rims Sanjay ?
 

AZGT

GT Owner
Mark IV Lifetime
Dec 20, 2005
1,354
Scottsdale, AZ.
AZGT: please put me down for a set of those centercaps. I have a set of powdercoated flat black base wheels....and have been thinking about a custom centercap myself.

Regards,

Sanjay


:thumbsup
 

HeritageBruce

GT Owner
Mark II Lifetime
Mar 13, 2006
748
Southern CA
Earlier post mentions the GT understeers with the stock setup?? I must have been driving a different GT on the track because mine oversteered ....I went with the REO 50's 275 front and 345 rears..NOW the car understeers...pushes the front..HRE 18 x 9 front , 19 x 13 rears..

KO,
What tire pressures are you running? Hot and cold starting pressures please.
 

shesgotlegs

GT Owner
Mark II Lifetime
Jul 20, 2006
1,181
HB, aside from the Bridgestones being "quieter and a better ride" are there any other pros and cons?

Thanks.

Terry
 
H

HHGT

Guest
HB, aside from the Bridgestones being "quieter and a better ride" are there any other pros and cons?

Thanks.

Terry

I ran a test drive at 26 psi all the way around. After the tires heated up, Steerability and rear slide control was amazing - especially with the whipple.
 

shelbyelite

PERMANENTLY BANNED
May 10, 2007
1
Here are some Iforged Astras that we just put on user SILVER1331 car. Look pretty good.....





 
Last edited:

shelbyelite

PERMANENTLY BANNED
May 10, 2007
1
 

shelbyelite

PERMANENTLY BANNED
May 10, 2007
1
 
Last edited:

Black GT

GT Owner
Mark II Lifetime
Jan 2, 2006
771
AZGT I love that look! I also like the look of the standard wheel much better than the Optional wheel. Just looks right with the GT.
 

B O N Y

MODERATOR & FGT OWNER
Mark IV Lifetime
Sep 5, 2005
12,110
Fresno, Ca.
I just feel by changing the wheels you personalize your ride. That is why I always do it.:lol:banana:lol
 

Attachments

  • n7638000544491175042rf8.jpg
    n7638000544491175042rf8.jpg
    60.3 KB · Views: 344

kumar

GT Owner
Jan 31, 2007
1,011
Dallas

Shelby, can you tell us if those are 19/20 and what tires were used?
 

kumar

GT Owner
Jan 31, 2007
1,011
Dallas
nevermind, im an idiot

you can clearly read 335/30/20
 

SteveA

GT Owner/B.O.D
Mark IV Lifetime
Dec 13, 2005
3,694
Sandpoint Id
nevermind, im an idiot

you can clearly read 335/30/20

Pissssit, use the delete post button, it's become my best friend:lol
 

BlackICE

GT Owner
Nov 2, 2005
1,416
SF Bay Area in California
The Corsa 265/40/18 and 345/35/19 I have on my car.
The 265 are not (yet?) in the Pirelli list ,but must be produced
for somebody.I got from my german tireshop.
Don´t know how they perform because of the winterweather here.

I can't find anyone in the US selling the 265/40/18, but the Pirelli site does list them.

Check out page 8 on the pdf file on this link

http://www.pirellityre.com/en_IT/browser/attachments/pdf/brochure_racing_it.pdf
 
Last edited:

GERMANORACING

GT Owner
Dec 4, 2006
132
Farmington CT USA
I haven't read all of the posts here, so forgive any duplication.

I replaced the standard tires with the Bridgestones RE 050A and RE 050A Scuderia.

Just for comparison

Stock: 235/45/ZR18 88 Y - wheel and tire 45.2 pounds - 26.33 diameter / 9.3 wide
Stock: 315/40/ZR19 103Y - wheel and tire 56.0 pounds - 28.92 diameter / 12.4 wide

Naturally the stock tires are missing some rubber, but I think I made up for the weight with nails.

New: 265/40/ZR18 101 Y - wheel and tire 52.4 pounds - 26.35 diameter / 10.4 wide
New: 345/35/ZR19 110 Y - wheel and tire 61.4 pounds - 28.51 diameter / 13.6 wide

Now for the wheels. Something I have been trying to do for a while. They are the stock wheels minus the crappy plastic center cap. Lug nuts are those from the optional BBS wheels. Center caps at the moment are cheap ones from an SUV wheel. I am having a screw in cap made with a custom FGT logo - machine guy has been been slow getting at it. I will have several sets of those made if anyone else wants one.

I like the look. To me the optional BBS wheels I had were not the right ones. They are a good, contemporary look, but I wanted something more in flavor of the original car, something not so prissy. I was also not crazy about the standards with that ugly cap (don't throw stones - I also have a car with those still on). I also think these are a good approximation to the wheels that were on the concept cars - with the wheel look that should have been on ours in the first place.

Curious of opinions - my feelings won't be hurt.

I thinking about buying the Bridgestones , but I am curious, is there a reason that you went with the 265s rather then the 255s.
The reason I ask is... the rear 345s are 0.41 lower in diameter then the 315s so would'nt it be better to have the 255s which are 0.23 lower then the stock 235s, rather then 265s which are 0.02 taller then the stock 235s.
Stock GYs setup (235/315) is 2.59" lower ,so the 255/345 it is 2.41"
But 265/345 it's 2.18".........
Just my thoughts , I was just curious , I noticed a few GT owners going with the 265s :willy
 

GERMANORACING

GT Owner
Dec 4, 2006
132
Farmington CT USA
I haven't read all of the posts here, so forgive any duplication.

I replaced the standard tires with the Bridgestones RE 050A and RE 050A Scuderia.

Just for comparison

Stock: 235/45/ZR18 88 Y - wheel and tire 45.2 pounds - 26.33 diameter / 9.3 wide
Stock: 315/40/ZR19 103Y - wheel and tire 56.0 pounds - 28.92 diameter / 12.4 wide

Naturally the stock tires are missing some rubber, but I think I made up for the weight with nails.

New: 265/40/ZR18 101 Y - wheel and tire 52.4 pounds - 26.35 diameter / 10.4 wide
New: 345/35/ZR19 110 Y - wheel and tire 61.4 pounds - 28.51 diameter / 13.6 wide

Now for the wheels. Something I have been trying to do for a while. They are the stock wheels minus the crappy plastic center cap. Lug nuts are those from the optional BBS wheels. Center caps at the moment are cheap ones from an SUV wheel. I am having a screw in cap made with a custom FGT logo - machine guy has been been slow getting at it. I will have several sets of those made if anyone else wants one.

I like the look. To me the optional BBS wheels I had were not the right ones. They are a good, contemporary look, but I wanted something more in flavor of the original car, something not so prissy. I was also not crazy about the standards with that ugly cap (don't throw stones - I also have a car with those still on). I also think these are a good approximation to the wheels that were on the concept cars - with the wheel look that should have been on ours in the first place.

Curious of opinions - my feelings won't be hurt.

I thinking about buying the Bridgestones , but I am curious, is there a reason that you went with the 265s rather then the 255s.
The reason I ask is... the rear 345s are 0.41 lower in diameter then the 315s so would'nt it be better to have the 255s which are 0.23 lower then the stock 235s, rather then 265s which are 0.02 taller then the stock 235s.
Stock GYs setup (235/315) is 2.59" lower ,so the 255/345 it is 2.41"
But 265/345 it's 2.18"......... (The 255s are 99Y)
Just my thoughts , I was just curious , I noticed a few GT owners going with the 265s :willy
 

gt40man

GT owner
Aug 27, 2007
37
track report

i have not seen any track reports on these tires so i will make one now. at shelby club event at elkhart lake a couple of weeks back i ran a stock ford gt with a pulley on the bridgestone 265/40 zr 18 front and 345/35/zr19s rear. they are excellent tires but i do think there was more push/understeer than with the stock goodyears and i had to trail brake carefully into corners to set up a car rotation drift. the car ran 2:32.1. last year with similar weather and the goodyears and no pulley it ran 2:33.3. so, considering a pulley enhancement not much of a gain and im afraid i have to agree with KOSUPPLY"s earlier post. he knows what he is talking about. the goodyears would be faster on a consistent basis counterintuitive as that seems since the car rotation is easier to control. i would not have believed it myself but i dont argue with electronic timing.KOSUPPLY's comments on handling are correct although in turns where you can do aggressive trailbraking you can get the car to rotate but you cant easily do that consistently in all turns.
 

BlackICE

GT Owner
Nov 2, 2005
1,416
SF Bay Area in California
I don't have a huge concern about a little height difference front to rear, since I have T&A perches and can adjust to compensate if needed. I have no 1st hand experience with these tires, but from what has be posted, I think the Bridgestones vs. GY the BS should be better for the street because they have better grip during acceleration, but on the road coarse the GY are a little better. However if you are serious about the track you would be running Hoosiers.
 

kosupply

GT Owner/Board of Directors
Mark IV Lifetime
Jan 27, 2006
236
Houston
Sorry Heritage...been way out of touch...I don't remember now the pressures....it has been a while since I had er on the track.