Do they still sell them? I can't seem to find them on their website. I used their part number 880592 to 880596, but nothing came up? I'm looking to buy the set and replace them on my car.
Autometer oem gauges
- Thread starter unotaz
- Start date
partssmann
GT Owner
See attached sales flyer and contact info below:
Brett Littlefield
---
Auto Meter Products
Commercial OEM Solutions Mgr
http://bit.ly/AMPCATALOG
(815) 991-2267 desk
Brett Littlefield
---
Auto Meter Products
Commercial OEM Solutions Mgr
http://bit.ly/AMPCATALOG
(815) 991-2267 desk
Attachments
KennethClay
GT Owner
Just for grins, I tried the click-through and got a 404 error.
I know the folks that bought AutoMeter (it was almost us), so if you need a contact there I could inquire.
Kenneth
I know the folks that bought AutoMeter (it was almost us), so if you need a contact there I could inquire.
Kenneth
twobjshelbys
GT Owner
I found a link somewhere but as far as I was able to find there is no "drill down" from their main page that takes you there. I suggest you call them directly.
fjpikul
GT Owner
You have to call direct. They don't stock them. You have to wait until they make they're next run and it might be a while. No speedo or tach available.
partssmann
GT Owner
Ok, I guess I will give Autometer a call tomorrow morning and place the order! Thanks for the feedback guys!
As you are newly registered here, you might not be aware of the Speedhut option. They offer a complete dash replacement for ~$1200.
The downside, not an exact match to OEM especially the flat bottom. I FULLY understand the desire for 1000% OEM.
The upside, at least for the many years I have had them, they work. Another upside, to many, they have many different options to personalize them (colors, shift lights etc, even custom boost ranges).
Was the right direction for me, as the Autometer option did not yet exist. Yes the look is slightly different, but no one will know, except a fellow owner.
https://www.speedhut.com/about-fordgtgauges.html
The downside, not an exact match to OEM especially the flat bottom. I FULLY understand the desire for 1000% OEM.
The upside, at least for the many years I have had them, they work. Another upside, to many, they have many different options to personalize them (colors, shift lights etc, even custom boost ranges).
Was the right direction for me, as the Autometer option did not yet exist. Yes the look is slightly different, but no one will know, except a fellow owner.
https://www.speedhut.com/about-fordgtgauges.html
GKW05GT
GT Owner
Agree with Andy Speedhut is a great option and you can save your originals which make a nice display
You can get any of the small gauges new from Autometer and these new gauges have different innards so they will be very unlikely to fail like the OEM design has. Similarly, we can replace the innards of both the tach and the speedometer so that they are fixed and will be extremely unlikely to fail in the future. In summary, the "gauge issue" can be completely resolved using the OEM enclosures.
davidn
GT Owner
Yup, I was aware of the Speedhut set up, which looked great! As you have guessed, I'm trying to keep everything looking OEM, so that's why I ended up choosing to go with the Autometer route.