Which pulley


0

06fordgt

GT
Mark II Lifetime
Le Mans 2010 Supporter
Nov 8, 2006
1,911
Toronto Canada
Guys most of you have done major work to your babies. :thumbsupI am not interested in the whipple route but would still like to change the pulley and do a tune to match. Who/where is the best place to get the pulley from and est. cost? :confusedIt looks from reading the posts the the SCT tune is the best way to go.
Thx for all your advise!:cheers
 
Not to hijack, but I was curious if the pulleys are the same between the GT500 and the GT itself as well. I think so but need to know for sure as I already have a GT500 pulley... Stan
 
06fordgt said:
Guys most of you have done major work to your babies. :thumbsupI am not interested in the whipple route but would still like to change the pulley and do a tune to match. Who/where is the best place to get the pulley from and est. cost? :confusedIt looks from reading the posts the the SCT tune is the best way to go.
Thx for all your advise!:cheers
Click to expand...

Almost 10,000 pulley tune miles here. Got them from Heffner Performance. Can't recall exactly what it cost. Something like $1500.

http://www.heffnersperformance.com/
 
Had a Heffner tune and pulley as well.... it was great, then I discovered the big WHIPPLE.
 
I had the Hugh Heffner pulley job in Chicago. Was pretty sore afterwards.
 
The Heffner pulley and tune (SCT) is a great combination. No need for a MAFIA box and the car runs/drives just like OEM but just pulls stronger.
 
fjpikul said:
I had the Hugh Heffner pulley job in Chicago. Was pretty sore afterwards.
Click to expand...

DOC that's funny !!! :willy
 
.

bony said:
Had a Heffner tune and pulley as well.... it was great, then I discovered the big WHIPPLE.
Click to expand...


Have his old Heffner tune and pulley .... it is great.

That being said, I got a ride around the block in a big Whipple-ized FGT on Saturday and there is no comparison. Kind of like when the ship hits "Plaid" in Spaceballs; as opposed to regular old light speed.
 
DBK is correct; it is about $1,500 excluding labor & tax.
 
fjpikul said:
I had the Hugh Heffner pulley job in Chicago.
Click to expand...

OK here comes the Playboy club jokes.

I can tell you all that growing up in Chicago it was a treat when there was a club downtown and the resort in Lake Geneva:cheers
 
bony said:
Had a Heffner tune and pulley as well.... it was great, then I discovered the big WHIPPLE.
Click to expand...

I was planning on going the pulley and tune route until Bony gave me a ride in his Whipple-ized rocket sled. I just don't see the point any longer in taking the interim route before going BIG.

It's a F*#@kin' kick in the a$$ that delivers grins. :willy
 
Kingman said:
I was planning on going the pulley and tune route until Bony gave me a ride in his Whipple-ized rocket sled. I just don't see the point any longer in taking the interim route before going BIG.

It's a F*#@kin' kick in the a$$ that delivers grins. :willy
Click to expand...

I felt the same way when Ed Sims gave me a ride in his Whippled GT! Never even thought about a pulley.

:thumbsup
 
Kingman said:
I felt the same way when Ed Sims gave me a ride in his Whippled GT! Never even thought about a pulley.

:thumbsup
Click to expand...

BlackICE said:
I was planning on going the pulley and tune route until Bony gave me a ride in his Whipple-ized rocket sled. I just don't see the point any longer in taking the interim route before going BIG.

It's a F*#@kin' kick in the a$$ that delivers grins.
Click to expand...


Great - you guy's got me hooked and now looking for a Black Whipple!

Q: How the hell do I sneak it in the house without the wife finding out?:eek
 
Last edited:
We have the following....

06fordgt - We have the following:

750HP - $2099.99

SCT XCal2 w/ Custom MMP Tunes
Heffner 2.76 Supercharger Pulley
Accufab T/B w/ Bellow
Diablosport MAFia
NGK Spark Plugs

850HP - $10199.99

SCT XCal2 w/ Custom MMP Tunes
Whipple Supercharger
Accufab T/B w/ Bellow
Diablosport MAFia
NGK Spark Plugs

Both kits above can be upgrade to an SCT LiveWire for an additional $500 which includes a dash or window mount.

HP results above are based on some sort of aftermarket exhaust system being on the GT. Parts above are usually in stock at all times and can be shipped out immediately upon ordering.

If you already have some of the items listed above please contact us for pricing so we can adjust accordingly.

If you have any questions or would like a custom quote please let us know.

Jack @ MMP Sales
Muscle Motors Performance, Inc.
[email protected]
http://www.musclemotors.com
(818)888-7778
"Here to Make Racing Fun & Affordable for Everyone!"
 
Last edited:
Thx for your help guys. Whipple may be the best route but I just don't want to go that way.
Now decisions, decisions.:willy
 
Jack, can I ask why you use the MAFia versus a SCT BA2600 or 3000 MAF.

Also can I get a quote on the pulley alone, a mail order tune alone, and then the pulley with a mail order tune, I have Xcal2's in stock so don't need one. TIA ... Stan
 
Pulleys and/or Tunes can be purchased form the following supporting vendors:

http://www.heffnersperformance.com/
http://www.hennesseyperformance.com/
http://www.musclemotors.com/
http://www.fastpartsnetwork.com/
http://accufabracing.com/ford_gt.htm

Thanks for the support :cheers
 
Thanks DBK, I just ordered my first batch of parts, from John/Accufab, (axel bolts, radiator springs, drain plugs, and air inlet sleeve). We use them to machine our GT blocks for truck use (wet sump, 5.4 truck starter, etc.) anyways so I knew they were always good to deal with. Im glad to be a customer and look forward to being a customer of more vendors...

I also tried ordering the engine bay light from Jay yesterday but he said two more months.. Stan
 
You must log in or register to reply here.

Top Bottom