Search results

These are photographs of the passenger and driver side airbag units after the new inflators were installed. Do these appear to be the final inflators for the recall? I would like to know before I put everything back together.

Has anyone installed the Fumoto valves for draining coolant from the engine block? If so what is the correct size to order. I have found it to be a bad experience. If no one has installed the valves does anyone have a suggestion to avoid the mess and taking a coolant shower? AJK

Posted this in general forum but no help yet so thought I'd try tech people. Did a search and found the correct application for the oil tank drain but couldn't fine the correct application for the coolant drains for the engine block. Can some help me out with the correct part number for...

Did a search and found the correct application for the oil tank drain but couldn't fine the correct application for the coolant drains for the engine block. Can some help me out with the correct part number for those? AJK

Anyone know where the to go to find out the new GT auto shows schedule. I've heard it will be at the Chicago one which the last weekend overlaps the Milwaukee one. I'm interested in knowing if it will be at Milwaukee at all. AJK

The workshop manual refers to removing 19 bolts and radiator open cover to get at the front radiators. Is this the front splitter or are they referencing something else. Also I could not find a torque spec for the block drain plugs which I believe are 10mm allen heads. I searched past posts...

I noticed after driven to full temperature and turning off engine after a short while I can hear a hissing sound from the engine coolant tank cap. The seal looks good and the cap is tightened correctly (click,click). Is this normal or do I have a bad cap. AJK

I tested the coolant with a multimeter set on DC 20 scale and get a reading higher than .1. According to the article on Pelicanparts website (see below) this could be caused by a missing or poor accessory ground. I've also used a test strip which indicates the coolant is still OK. I've tested...

Deleted. Double posted.

Has anyone tried this in their GT or other vehicles? AJK

to cruise around this showroom. Something for everyone. AJK http://www.autosalon-singen.de/_virtueller_Rundgang/tourdaten_fuer_website/tour_en.html

Collectors of Ford GT models might be interested in the #60 and #61 Matech Ford GT Le Mans models produced by Spark. I recently purchased the #61 car. Athough the model is small (a 1:43 scale car is about 4 inches long), it is highly detailed. The Ford GT Forum sponsor logo even appears on...

These look like they do not require replacing if they are in good condition. Yes or no? AJK

for clearance?

I copied this statement from a post I found when doing a search about the oil pump belt. "External pump is driven by a crankshaft belt which could fail and I am sure the engine monitoring system would shut down the engine immediately due to no oil pressure." Is it true that the engine...

I"m about to do the first oil change and have three questions with reference to removing the diffuser and engine panel. From the shop manual and previous posts it appears both panels need to be removed. Do both of these panels have a seal? If they do can they be used again? If they have seals...

If your remote doesn't release the trunk latch but the manual cable release works there could be something broken in the latch. The replacement latch comes with the cable attached but you can remove the cable and attach your existing cable so you don't have to deal with the fender liner to get...

A few more. AJK

Saw the GTs run at Road America. Here are a few pics. Black Swan finished 10th in class and 24th overall. Robertson was 12th in class, 40th overall.

I would like to know if the two Doran cars will be showing for the ALMS race on 8/09 at Road American ? AJK