Dymag wheels
- Thread starter anya
- Start date
BlackICE
GT Owner
How close is are your tire's ratios diameter front to rear compared to stock. If it is too far off you will get an ABS error.
Kip Ewing
CF Vendor
Dymag
Back when I was shopping Dymag, a 19" was not available.
I just learned this past week that Dymag is out of business.
There is a company that picked up their alloy motorcycle wheel business, but the carbon car wheels are no longer produced.
Have you always had an ABS fault? I know of cars with 20s front and rear that didn't trip ABS faults.
Back when I was shopping Dymag, a 19" was not available.
I just learned this past week that Dymag is out of business.
There is a company that picked up their alloy motorcycle wheel business, but the carbon car wheels are no longer produced.
Have you always had an ABS fault? I know of cars with 20s front and rear that didn't trip ABS faults.
A GT expert said the wheels need a 5% differential between front and rear (smaller front or larger rear) Yes the light has always come on after 3 to 10 miles of driving. We tried the dyno to no avail, but got 632 rwhp.
Saw 19" set of dymags on ebay but would just need 2.
Kip we missed you last week!
Jim
Saw 19" set of dymags on ebay but would just need 2.
Kip we missed you last week!
Jim
Superfly
HERITAGE GT OWNER
Yeah, Dymag is done. Lots of sets still available though, just have to look around. I've got 18 fronts, 19 rears. My buddy in Calgary has 19 fronts, 20 rears. A buddy in California has 20 fronts and rears on his Audi R8.
But there's loads of cars running Advan ADV1's or other brands that have 20 front AND rear. Surely it's mostly a question of the size of rubber you're putting on it? Maybe your fronts are too tall or your rears are too small?? What size tires are you running?
But there's loads of cars running Advan ADV1's or other brands that have 20 front AND rear. Surely it's mostly a question of the size of rubber you're putting on it? Maybe your fronts are too tall or your rears are too small?? What size tires are you running?
FBA
GT Owner
Exactly - and you should maintain the O/D same as stock. That would ensure maintained speedo accuracy and overall geometry. Personally, I did 20" all around on my Z06 and I hate the ride now. I went the 19/20 route on my GT and my SRT10 and am much happier.