Thanks!
The specs probably don't vary much from these:
Block: Dart, Splayed Cap Four-Bolt Mains, CNC Machined, 4.125 Bore, Scalloped Water Jackets, One-Piece Rear Main Seal
Crankshaft: 4340 Steel, Non-Twist Forging, Micro Polished, and Chamfered, Internal Balance, 4.000" Stroke
Connecting Rods: 4340 Steel "H" Beam with 7/16" ARP Cap Bolts, 6.200" Length
Pistons: Lightweight Forged, Reverse Dome, 10.2 Compression, with Wrist Pin Below Oil Ring and Cooling Ribs on Underside.
Rings: Low Friction, Single Moly, 1/16" x 1/16" x 3/16"
Camshaft: Custom Ground Hydraulic Roller .571"/.585" Lift, 236°/248° Duration @ .050"
Rocker Arms: 1.6 Ratio, Full Roller
Cylinder Heads: Smeding / AFR, 205cc Intake port, Fully C.N.C Ported, 2.08"/1.60" Valves
Induction System 8 Stack Electronic Fuel Injection, Custom Tuned and Calibrated by Smeding. Complete with Computer Sensors Wiring Harnes, and Fuel Pump
Distributor: MSD electronic Polished Billet Aluminum Housing
Warranty: 3 Year, Unlimited Mileage