Part needed


Rick’s GT

GT Owner
Jun 13, 2025
35
Indiana
Does anyone know where I can get the rubber bumper stop for the clam shell?
IMG_4636.jpeg
 
Why not replace them with the springs?
 

Attachments

  • IMG_2405.jpeg
    IMG_2405.jpeg
    4.2 KB · Views: 6
Why not replace them with the springs?
I have not heard of those. I have owned the car for a couple of months and the clamshell has always been hard to close so I wanted to try and adjust the bumper down and it just broke off.
 
Replace with the springs(off of a Stang?). Part number is on the forum somewhere. Get new plastic inserts from 2112. Put anti-seize on threads of other stop before pulling it. You'll need nuts too. Right next to the stop is another part with the size/style nut you'll need. Use that part to order the nuts from Ford.
 
Thank you. I will check it out.
 
Thank you. I will check it out.
The clamshell stop you show came with 2005 and early 2006 GTs. Subsequently 2006 models came with the springs. Try Fordpartsgiant.com
 

Attachments

  • IMG_2406.jpeg
    IMG_2406.jpeg
    205.5 KB · Views: 18
Thank you.
 
Replace with the springs(off of a Stang?). Part number is on the forum somewhere. Get new plastic inserts from 2112.

I am down to the aluminum with Delrin insert version. Have 4-5 sets left.
 
How much are the Delrin?
 
I don’t have any solid Delrin left. I do have a few of the billet aluminum with Delrin inserts. $45 shipped for a set.

 
I will take a set. Let me know how to get you paid.
Thanks, Rick
 
P/M me your address.