Looking for power steering hose 05/06 GT


Vance

New member
Dec 7, 2019
4
USA
Looking for a power steering hose from the reservoir to the pump…it’s 5/8 in diameter. Can anyone help supply this part? Would be greatly appreciated!

Thank you,
Vance
 

KennethClay

GT Owner
Mark IV Lifetime
Oct 15, 2012
881
New York
Looking for a power steering hose from the reservoir to the pump…it’s 5/8 in diameter. Can anyone help supply this part? Would be greatly appreciated!

Thank you,
Vance
There’s a thread on this—someone was making new ones and offering them for sale.
 
  • Like
Reactions: Fast Freddy

Vance

New member
Dec 7, 2019
4
USA
There’s a thread on this—someone was making new ones and offering them for sale.
Great to know - could you please direct me to this thread? After a quick search, I was unable to locate! Much appreciated
 

KennethClay

GT Owner
Mark IV Lifetime
Oct 15, 2012
881
New York
 

Johntpr

GT Owner
Mark II Lifetime
Jan 18, 2017
241
Rockland County, NY
I just wanted to offer my insight after searching through thousands of similar-shaped hoses. A piece of straight hose really won't work due to the bend going into the PS pump side.


This hose is from a BMW - The original BMW Part number is listed here https://www.amazon.com/BMW-02-06-Steering-GENUINE-Reservoir/dp/B00G3YG7UY

Here is a link that shows how this particular hose interchanges among hose companies along with their part numbers. You can also do a search of let's say a BMW 325i on Rockauto.

https://partshawk.com/edelmann-80633-power-steering-reservoir-hose.html

Here is an Amazon link with a good photo of the hose: https://www.amazon.com/dp/B00HFLAM96?psc=1&ref=ppx_yo2ov_dt_b_product_details

The Edelmann hose I bought wasn't quite thick as the original discontinued Ford 4G7Z-3A713-AA hose, so I used hose clamps instead of the original spring clamps. It is possible that one of the other brands of hoses are thicker or maybe the OE BMW version.


Anyway, this hose has all the correct bends and shapes and is 5/8 in diameter. The problem is that it is too short on the reservoir end by a few inches.

I used this hose barb: https://www.amazon.com/dp/B07G3K8L45?psc=1&ref=ppx_yo2ov_dt_b_product_details

Along with a short piece of 5/8 PS return hose to extend the hose with clamps.

Hopefully, this can tie people over until Rich's revised version reproduction hose becomes available.
 
Last edited:

HighHP

GT Owner
Jun 3, 2019
466
Spokane, WA
Thanks for sharing this info.
 
  • Like
Reactions: Johntpr

twobjshelbys

GT Owner
Jul 26, 2010
6,177
Las Vegas, NV
Do your home work on the ones offered here. Rich thought he might have a longer lasting solution but haven't seen an update recently
 
  • Like
Reactions: Fast Freddy

2112

Blue/white 06'
Mark II Lifetime
Thanks for sharing this info.

+1
 
  • Like
Reactions: Johntpr

saleenrose

GT Owner
Jul 14, 2013
78
Lots of parts being listed on eBay, several hoses there.
 
  • Like
Reactions: Fast Freddy

Johntpr

GT Owner
Mark II Lifetime
Jan 18, 2017
241
Rockland County, NY
Lots of parts being listed on eBay, several hoses there.
4G7Z-3A713-AA ???
 

2112

Blue/white 06'
Mark II Lifetime
4G7Z-3A713-AA ???

‘maybe he means the guy who is parting out his FGT piece by piece?
 
  • Like
Reactions: Johntpr

jammer

GT Owner
Mark II Lifetime
Apr 19, 2016
186
Could this be made to work? Titan UFW Ultraflex 2SNK Braided Hydraulic Hose. Min bend radius 3.5 inch.
 

AJK

GT Owner
Mark II Lifetime
Jul 12, 2006
336
Could this be made to work? Titan UFW Ultraflex 2SNK Braided Hydraulic Hose. Min bend radius 3.5 inch.
Is the OD the same as OEM hose?
 

roketman

GT Owner
Mark IV Lifetime
Oct 24, 2005
8,069
ma.
Rich of GT guy LLC has an upgraded hose
 
  • Like
Reactions: JWZ

The Grey Ghost

GT Owner
Mar 13, 2009
691
Kansas City
Rich of GT guy LLC has an upgraded hose
Is this to replace the hoses we already bought that have been seeping?
 

jammer

GT Owner
Mark II Lifetime
Apr 19, 2016
186
Is the OD the same as OEM hose?
OD is 0.97"
 

PeteK

GT Owner
Mark II Lifetime
Apr 18, 2014
2,460
Kalama, Free part of WA State
Guys, it ain't that complicated. The hose is a return hose, so it's not under pressure. Any oil-rated hose of the correct diameter will work. It would be nice if it had bends molded in approximately the same places, otherwise, just snake it around whatever way it fits best.
 
  • Like
Reactions: JWZ

HighHP

GT Owner
Jun 3, 2019
466
Spokane, WA
O'Reilly's and NAPA carry bulk hose rated for power steering fluid.
 

twobjshelbys

GT Owner
Jul 26, 2010
6,177
Las Vegas, NV
Try a heavy equipment service group (Case, Caterpillar, Bobcat, etc). When I was in Colorado they made up hydraulic hoses for my skid loader on site... It might not be rigid with bends though.
 
I just wanted to offer my insight after searching through thousands of similar-shaped hoses. A piece of straight hose really won't work due to the bend going into the PS pump side.


This hose is from a BMW - The original BMW Part number is listed here https://www.amazon.com/BMW-02-06-Steering-GENUINE-Reservoir/dp/B00G3YG7UY

Here is a link that shows how this particular hose interchanges among hose companies along with their part numbers. You can also do a search of let's say a BMW 325i on Rockauto.

https://partshawk.com/edelmann-80633-power-steering-reservoir-hose.html

Here is an Amazon link with a good photo of the hose: https://www.amazon.com/dp/B00HFLAM96?psc=1&ref=ppx_yo2ov_dt_b_product_details

The Edelmann hose I bought wasn't quite thick as the original discontinued Ford 4G7Z-3A713-AA hose, so I used hose clamps instead of the original spring clamps. It is possible that one of the other brands of hoses are thicker or maybe the OE BMW version.


Anyway, this hose has all the correct bends and shapes and is 5/8 in diameter. The problem is that it is too short on the reservoir end by a few inches.

I used this hose barb: https://www.amazon.com/dp/B07G3K8L45?psc=1&ref=ppx_yo2ov_dt_b_product_details

Along with a short piece of 5/8 PS return hose to extend the hose with clamps.

Hopefully, this can tie people over until Rich's revised version reproduction hose becomes available.
Thanks very much for your undoubtedly tedious work to find a similar hose! I bought the genuine BMW hose thinking that because it's not a knockoff, it might be a bit larger diameter than the Edelmann you bought. Compared to the Ford original, the BMW hose seems to be .010-.020 inches smaller diameter, which might not be significant. Could you please measure and post the diameter of the Edelmann hose for comparison?

Many thanks again!
 
  • Like
Reactions: 2112