maybe somebody can help me out and tell me how to post new pics of the ford gt thats for sale.
tanner
tanner
Im new
- Thread starter thrashdu2002
- Start date
FlorIdaho Chris
Yeah, I've got one.
Host the photo somewhere else and link to it. I use Photobucket.com but there are many other sites that host photos.
SYCO GT
GT Owner
Welcome to the GT Forum, my name is Jennifer aka dorkymom3. I work for Saleen in the Troy Mi. facility. While program was running, I built the drivers door. You will enjoy this site as well as your car!!! DBK & GTJoey are awesome and will make your experience here comforting. Have a great day & be safe...
Quickdraw
pit crew chief
- Dec 28, 2006
- 273
Jennifer,
My drivers door (white '06 # 400017) has poor alignment. The front corner towards the car middle sticks up higher than the roof line and the door close to the opening handle is very close to the car body, maybe 1/16th clearance. I have worried that it will hit the car body and chip paint at some time.
My question is the fix to re-align the door difficult or reasonably simple. I have seen doors re-aligned before using a wooden two by four and a hammer, not a method that gave me confidence. If I take the car into an average Ford shop do you think that I will get the car back with a better alignment on the door or am I headed for more trouble with it. I am also a little worried about the need to loosen the bolts on the hinge and chipping off paint from them. What are your thoughts on what I should do ? I could take it in to the Saleen facility in Irvine CA if there was some way to get approval to take it in there.
I would appreciate any insight that you may have in door alignment issues.
Regards, Dave
My drivers door (white '06 # 400017) has poor alignment. The front corner towards the car middle sticks up higher than the roof line and the door close to the opening handle is very close to the car body, maybe 1/16th clearance. I have worried that it will hit the car body and chip paint at some time.
My question is the fix to re-align the door difficult or reasonably simple. I have seen doors re-aligned before using a wooden two by four and a hammer, not a method that gave me confidence. If I take the car into an average Ford shop do you think that I will get the car back with a better alignment on the door or am I headed for more trouble with it. I am also a little worried about the need to loosen the bolts on the hinge and chipping off paint from them. What are your thoughts on what I should do ? I could take it in to the Saleen facility in Irvine CA if there was some way to get approval to take it in there.
I would appreciate any insight that you may have in door alignment issues.
Regards, Dave