Are there existing provisions on the engine for the addition of an additional engine oil cooler? I know about the factory engine oil cooler/heater. It is totally inadequate for track days. We have "burned" 260deg temp dots placed on the oil return line very easily. It would probably have burned 280 or 300deg temp dots if I had some that hot. It did not burn a 350deg dot, thankfully. How would be the easiest way to add an additional oil cooler? I think this same engine block is used in a pickup truck. Does the pickup version use a spin on oil filter, that maby a "sandwich" oil cooler adapter could be found and installed for additional oil cooling? Or maby a remote oil filter adapter for this engine block? Any info would be appreciated greatly. :cheers