Concerned about heat behind the license plate that cannot vent, I made this license plate standoff using metric allen bolts, washers and steel sleeves from ACE Hardware. I used Permatex to provide added insurance that the bolts would not back off.
This created a larger 5/8" standoff and sufficient acute angle that the license plate lights still illuminate the plate itself.
This may be less expensive from Home Depot but was $12.55 including the Permatex and tax.
Hope it is helpful.
- doc
This created a larger 5/8" standoff and sufficient acute angle that the license plate lights still illuminate the plate itself.
This may be less expensive from Home Depot but was $12.55 including the Permatex and tax.
Hope it is helpful.
- doc
Last edited: