2005-2006 FORD GT LOWER SIDE STRIPES


NorthwoodGT

NorthwoodGT

GT Owner
Jun 12, 2009
1,217
Michigan
here is a list of the individual tape stripes that make up the 3 pc. lower tape stripes on each side of the car by ford part number.
each piece can be ordered separately

2005-2006 FORD GT LOWER TAPE STRIPES


5G7Z 6320000-AAA EBONY RH FENDER
5G7Z 6320000-BAA EBONY RH DOOR
5G7Z 6320000-CAA EBONY RH 1/4 EXT
5G7Z 6320001-AAA EBONY LH FENDER
5G7Z 6320001-BAA EBONY LH DOOR
5G7Z 6320001-CAA EBONY LH 1/4 EXT

5G7Z 6320000-AAB WHITE RH FENDER
5G7Z 6320000-BAB WHITE RH DOOR
5G7Z 6320000-CAB WHITE RH 1/4 EXT
5G7Z 6320001-AAB WHITE LH FENDER
5G7Z 6320001-BAB WHITE LH DOOR
5G7Z 6320001-CAB WHITE LH 1/4 EXT

5G7Z 6320000-AAC SILVER RH FENDER
5G7Z 6320000-BAC SILVER RH DOOR
5G7Z 6320000-CAC SILVER RH 1/4 EXT
5G7Z 6320001-AAC SILVER LH FENDER
5G7Z 6320001-BAC SILVER LH DOOR
5G7Z 6320000-CAC SILVER LH 1/4 EXT

5G7Z 6320000-AAD BLUE RH FENDER
5G7Z 6320000-BAD BLUE RH DOOR
5G7Z 6320000-CAD BLUE RH 1/4 EXT
5G7Z 6320001-AAD BLUE LH FENDER
5G7Z 6320001-BAD BLUE LH DOOR
5G7Z 6320001-CAD BLUE LH 1/4 EXT

scott
 
Scott - thank you . This will help those Forum members who had the stripes fall off of their vehicles,.
andy (ajb)
 
the reason I did this was because the Ford ordering matrix on the stripes is somewhat confusing. they don't list the color together by the placement on the car. so I took it apart and reposted it in hopefully an easier format for those in need down the road.
 
What is the price for a complete set (white)?
 
GT Venum said:
What is the price for a complete set (white)?
Click to expand...
they run 350.00 to do both sides, all 6 pieces.
 
If anyone is getting a set for the "shelf", they come rolled up. For long term storage, I took them out of the boxes, and laid them out flat.
 
Specracer said:
If anyone is getting a set for the "shelf", they come rolled up. For long term storage, I took them out of the boxes, and laid them out flat.
Click to expand...
Great Idea!
 
Whoa, whoa, whoa here, he is not telling everything. He wraps his wife up in them. .
 
fjpikul said:
Whoa, whoa, whoa here, he is not telling everything. He wraps his wife up in them. .
Click to expand...

That's fun (and funny)!
 
fjpikul said:
Whoa, whoa, whoa here, he is not telling everything. He wraps his wife up in them. .
Click to expand...

Andy's GT is a stripe-less black.

Only Andy could speak to his wife's preferences. :biggrin
 
And you just figured it out now after |I pointed out the obvious?
 
Scott's helpful post motivated me to do the side stripe delete. I was reluctant for two reasons. One, after 12 years would the "new" paint under the stripes look different? Two, what if I had regrets? I now have a set of stripes on the shelf in case I decide to revert.

A tip for anyone doing this. You need to heat the stripes at the ends to get them to release, but heat only the ends. Do not heat the full length.

I heated the full length on one side and all of the glue residue stayed on the car. It took me an hour of rubbing and a lot of denatured alcohol to clean it up.

I heated only the ends on the other side. The stripes were slower to peel off, but 90% of the glue residue stayed on the stripes. Cleanup was about 10 minutes.

Perhaps there is a better solvent, but I figured alcohol was safe.

Thanks again to Scott!


20171127_132029.jpg
 
Last edited:
3m adhesive remover is a champ, but your lungs appreciated the softer alcohol fumes.
 
You must log in or register to reply here.

Top Bottom