Search results

13/16" socket should get them off, if badly distorted try a 21mm. A flank drive socket would be best if they are very loose. Hope this helps.

Are referencing the stainless hex caps on the nuts? If so they are not designed to come off, simply put a hex wrench or socket on them.

cone seat surface finish 8.6 Ra (very smooth), thread pitch .5178", thread minor .4957", major .5604", thread length 1.2259", hardness Rc 41.8

14MM x 1.5. FWIW I had a Ford TI nut here and checked it over. All within spec. Cone seat was 60.27 degrees. Obviously it was not your nut Special K and the seat on the wheel will also dictate where the contact band is.

Stud is 14MM.

Special K, The contact band in the photo is low on the seat compared to what we typically see after torque tension testing. We have equipment that measures torque/tension as many OEMs have a tension range that must be met over a number of cycles (typically 10, sometimes 20) at a specified...

Well, tough to misinterpret that. Moly dry lubes from what I know though can have different particle sizes and chemistry so I was just surprised they are not more specific. Ti does not yield like steel does so the 'stretch' of the joint that gives the tension is a bit different than with a steel...

All OEM 60 degree lug nuts have a tolerance of plus 1 degree or 1/2 degree and minus zero. Maybe the TI is changing something I am not aware of but a moly lube (no specific formula?) is dangerous on threads or the seat of a normal steel lug nut. You are asking for trouble as the tension the...

FWIW I put Bridgestone 235/45R18 on the front and they worked fine as well.

n my second set of Bridgestone's, never had issues and much better tires than the originals.

Shaughnessy Overland treated my vette with kid gloves. Literally wear white cotton gloves when touching the car. My vette was in with some antique prancing ponies as well as some newer ones. I only used them twice but was impressed.

Shaughnessy Overland Express in Naples FL 239 970-0485

Reordered, all set. Thanks.

PM sent, thanks!

if we originally had an order in should we reorder? Thanks.

I would call MM and ask what they use.

I use NGK TR-6.

I would also like front and rear if still accepting orders. Thanks!

Got the news I was not selected, sad news and on my birthday to boot.