2017+ Drawing Showing Belly Pan Screw Locations by Length

[usmcfred]

I'm about to do my first Oil service on the '18 FGT. I know I saw a posting last year showing a schematic drawing of the different screw length locations for the belly pan. I've tried the Search function but can't seem to locate it. If someone could find this and post, that would be most appreciated. THANKS!

usmcfred

 

[THamonGT]

I took a picture of the diagram when it was posted.

 

[jaxgt]

this diagram was very helpful when we did our first oil change.

 

[Special K]

I took a picture of the diagra.View attachment 63173

You’re welcome!

 

[usmcfred]

I took a picture of the diagra.View attachment 63173

Thanks Tomy. Fred

 

[DakotaGT]

You’re welcome!

Lol! I thought that looked familiar. Thanks Kevin, for taking the time to sketch out that diagram- I am definitely keeping that handy for the first time I change my oil.

 

[Special K]

Lol! I thought that looked familiar. Thanks Kevin, for taking the time to sketch out that diagram- I am definitely keeping that handy for the first time I change my oil.

It’s not pretty, but it’s accurate...

 

[extrap]

 

[DakotaGT]

Is it correct that the 2 at the bottom are Long bolt to the left and Short bolt to the right?
View attachment 63184

I'm guessing those referenced the actual length of the long vs the short screw in Kevin's original schematic.

 

[extrap]

I'm guessing those referenced the actual length of the long vs the short screw in Kevin's original schematic.

See revised sketch ^

 

[Special K]

Is it correct that the 2 at the bottom are Long bolt to the left and Short bolt to the right?
View attachment 63184

Thanks for cleaning it up!
I drew the two on the bottom to show the length of the long vs short. They are not part of the belly pan bolt count.

 

[extrap]

Thanks for cleaning it up!
I drew the two on the bottom to show the length of the long vs short. They are not part of the belly pan bolt count.

I revised it ^ Just lemme know if you or anybody wants any edits.

 

[usmcfred]

See revised sketch ^

Thanks extrap ... very well done schematic.

Another method is to place a small piece of tape at the belly pan holes for the "long" screws, the non-taped holes obviously are for the "short" fasteners.

usmcfred

 

[extrap]

Thanks extrap ... very well done schematic.

Another method is to place a small piece of tape at the belly pan holes for the "long" screws, the non-taped holes obviously are for the "short" fasteners.

usmcfred

Good idea ... and if the tape ever happens to fall off, the drawing is the backup

 

[roketman]

Most excellent!!