I was finishing some work on my gal and buttoning up her belly pans as I happen to look at the side chin spoiler screws and noticed that on both sides there were several screws missing. Has anyone else noticed this?
Side chin spoiler screws
- Thread starter pe2unia
- Start date
No, I had my chin spoiler off putting in the wiring for the battery charger and all the skrews were present, but I did notice one of the black rivits was missing on the rocker panel to front wheel liner.
JOHN
JOHN
MAD IN NC
Proud Owner/ BOD blah bla
Yep, just last week I had my car and another GT on the lift and sure enough, three are missing on each side of both cars! While I noticed they are missing, I didn't have time to check to see if the holes were tapped in the rocker panel...... :bored
I'll double check today
It is not unusual to missing screws especially from the belly pan if you drive the car. Same goes for the front spoiler screws. If you over-tighten you can strip them so its a maintenance job from time to time
tmcphail
GT Owner/Vendor
I can get these if needed.
Front valance fastener :
OEM Catalog
Item Number MSRP Core Price Price
W707594S900 $2.67 $0.00 $1.76
BOLT & WASHER M6X25
Front valance fastener :
OEM Catalog
Item Number MSRP Core Price Price
W707594S900 $2.67 $0.00 $1.76
BOLT & WASHER M6X25
MAD IN NC
Proud Owner/ BOD blah bla
Torrie - can you order some spares for me...
4 front valance bolts
8 side valance screws (missing 6 already)
8 aluminum screws for aluminum belly pans
8 short diffuser screws
4 long diffuser screws
4 front valance bolts
8 side valance screws (missing 6 already)
8 aluminum screws for aluminum belly pans
8 short diffuser screws
4 long diffuser screws
tmcphail
GT Owner/Vendor
I took one of the bolts out and tried to put it in a couple of the empty spots and they just don't line up for what ever reason. I didn't want to force them. The car is on the four post lift so I can't look up in the hole to see what the problem is. I will get more time later this week to look into this further but for now I am setting up for a Sunday football championship weekend party. :biggrin If anyone else gets the chance to look into this please let us know.
Torrie, I too would like the same amount of bolts but would also like the slip on threaded fasteners that are used on the plastic wheel wells and such. Please PM me with the information and let me know about the threaded fasteners. thanks :cheers
tmcphail
GT Owner/Vendor
Will do in a moment I am doing a bunch of recal work on my viper right now. But I will get a message over to you in a moment so I can get you squared away as well
tmcphail
GT Owner/Vendor
Valance threaded nut
OEM Catalog
Item Number MSRP Core Price Price
W520802S426 $1.20 $0.00 $0.79
NUT U SPG M6-0.8-4.0
Nylon fender splash shield push pin =
OEM Catalog
Item Number MSRP Core Price Price
W705589S $1.70 $0.00 $1.12
PIN 6.4 X 20.4
Fender splash shield rivet retainer =
OEM Catalog
Item Number MSRP Core Price Price
N803946S $4.80 $0.00 $3.17
RIVET 6.3X22.8 BLIND
OEM Catalog
Item Number MSRP Core Price Price
W520802S426 $1.20 $0.00 $0.79
NUT U SPG M6-0.8-4.0
Nylon fender splash shield push pin =
OEM Catalog
Item Number MSRP Core Price Price
W705589S $1.70 $0.00 $1.12
PIN 6.4 X 20.4
Fender splash shield rivet retainer =
OEM Catalog
Item Number MSRP Core Price Price
N803946S $4.80 $0.00 $3.17
RIVET 6.3X22.8 BLIND