Trans Breather kit is now ready:

[MR2Race]

Trans Breather kit is now ready:
The testing and design is now complete. And I am now ready to take orders!

Please see photos at Member Photo Gallery
Search Keyword:

Transaxle Breather kit Contains Photo
Transaxle Breather kit on car photo

The kit includes:

An Aluminum Breather vent can. With an internal baffle. And a small filter attached.
The vent can bolts to the frame using existing nut inserts (no drilling required)

A special adaptor that replaces the production trans vent.

Length of clear Tygon hose. And required push-on fittings and hardware.

For $163.80

As an option we can also replace the clear hose and push-on fittings.
With Stainless braded hose and AN fittings. For an additional $60.00

I will accept credit cards through PayPal to aszilagyi@comcast.net
Or checks sent to:
T&A Shocks
7510 Bingham, Dearborn, Mi 48126

Thanks

Alex Szilagyi

I would like to send Photos of the kit on a car. Or a power point presentation to anyone who sends an Email to aszilagyi@comcast.net

 

[Dr Robert Harms]

Question

What is the purpose of (what I assume to be a ) chamber under the vent ? Is there any type of vent that doesnt use a hose clamp or an alternative fastening method ? Thanks !!

 

[MR2Race]

What is the purpose of the aluminum can under the filter?

What is the purpose of the aluminum can under the filter?
Good question, it is there for 2 reasons. First it is a place to install a baffle (just under the filter element). Further reducing the chance of any trans oil from splashing on the filter.

And the can is also a wide spot in the system that will promote the separation of air and oil. The gearbox can breath threw the filter element and the separated oil will flow back to the trans axle.

I feel it is a nice simple, elegant solution to a common problem.