Motor mount needed....

[gbvetracer]

Does anyone have a motormount? I need one. Cant find one anywhere online. Im pretty sure the left and right mounts are the same?
Thanks for anyones help!

 

[Xcentric]

PM Torrie (tmcphail).

 

[fjpikul]

Try X2 Builders in Granite City, IL. Phone 618-9310789.

 

[NorthwoodGT]

both mounts are the ssame but if one goes it's usually time to replace both. JMO

 

[2112]

both mounts are the ssame but if one goes it's usually time to replace both. JMO

What typically causes mount failure?

 

[Beach-GT]

1000HP for one thing. Using it too much the other.

 

[NorthwoodGT]

What typically causes mount failure?

the primary cause of failure is heat probably 90% of the time.

 

[2112]

the primary cause of failure is heat probably 90% of the time.

So would stock exhaust/manifolds be better or worse for this? I now the headers throw off huge heat, but they also allow more air in and around that area.

 

[RALPHIE]

So would stock exhaust/manifolds be better or worse for this? I now the headers throw off huge heat, but they also allow more air in and around that area.

The Long Tube Headers (M-9430-GT) and Rear Exit Headers (M-9430-GTX) can also create some heat problems for the clutch fluid and the starter wire connections. Rich & Denis (the GT Guy) have some heat shields available that will minimize this problem.

 

[2112]

I need to check into that. I have 9430-GTX (one without the big single muffler).