Heritage Roundel Sizes???

[AZSTAD]

Can anyone get me the outer diameter of the roundel on the hood and rear clam shell for the Heritage roundels?

There are several of us in PHX that had them made for the Rally. Initial sets were only for the doors, but I've got an owner that wants them for the hood and clam shell as well.

I think the clam shell may have been the exact same size? But want to confirm both.

Thanks - in advance!

 

[shelbyelite]

16 on the front bonnet, 19 on clamshell, 20 on doors (thats in inches)
The black stripe around the outer edge is 1/4 inch wide

 

[AZSTAD]

Sweet. Thanks Shelby!

 

[Fubar]

I am pretty sure there are three sizes. The clamshell is different also.

http://www.fordgtforum.com/forums/showpost.php?p=114771&postcount=8

 

[Pete S.]

I think the clam shell is around 18", a bit smaller than the doors. At least that's what I had my sign guy put on mine.

Pete S.

The ford dealer can call it up on the computer and the sizes will be indicated.

 

[Not 4N]

I have printed many sets and the doors are 20" the clamshell is 19" and the front bonnet is 16"

:cheers
Trent

 

[Pete S.]

Trent is correct: finally dug out the old paperwork and took a look.

19"

16"

2 X 20"

 

[shelbyelite]

The doors mesure out to 19 because of the dips in the door (sorry, guess I should have clearified). The clamshell is 19. The doors are 20 so that they have are 19 inch tall after the dips in the door takes up an inch....