Proline's Windshield Skin Instructions here!


STORMCAT

STORMCAT

GT
Mark IV Lifetime
Le Mans 2010 Supporter
May 25, 2006
7,592
Ft. Lauderdale
Hello all
Bo from Proline was going to post the instructions but couldn't get on the site. Here's their instructions. They seem to be straight forward. I am not a pro and have not tried the reverse roll process. I used the other method and had great success.
 

Attachments

Great! Thanks Stormcat.
 
Hey, do any of you guys think cleaning first time around with a California claybar might be better than scraping with a razorblade? I've never used a claybar on my glass. Any suggestions or past knowledge? Thanks Frank
 
fjpikul said:
Hey, do any of you guys think cleaning first time around with a California claybar might be better than scraping with a razorblade? I've never used a claybar on my glass. Any suggestions or past knowledge? Thanks Frank
Click to expand...

Dr Frank,

I would suggest that YOU use your scalpel on those lumps of clay rather than a razor blade.:lol :eek :lol
 
Another good one Spirit! But the clay cleans the clearcoat sooo well, wonder how it works on glass?
 
fjpikul said:
Another good one Spirit! But the clay cleans the clearcoat sooo well, wonder how it works on glass?
Click to expand...

The clay will likely leave a residue that when this process is used on the paint is removed during the wax prep and waxing process.

Takes care

Shadowman
 
Has anyone tried to removed bug splat off the film yet?
 
I thought about the clay bar on the glass but didn't try it. I think I'm the first one to put the film on. I drove the car 400mi and got the film dirty but no heavy residue of any type. It's pretty hard film and supposed to stand up to wiper use.
 
Hey thanks Stormcat!
I'm going to try my install this weekend. :biggrin
 
KJRGT said:
Hey thanks Stormcat!
I'm going to try my install this weekend. :biggrin
Click to expand...



My is going own today as well, I am glad the detailed instructions have been posted. Stay tuned....:biggrin
 
Thank you

I have printed a copy as well.

All the best

Shadowman
 
As reported, the Shampoo mixture as shown by Proline is on the strong side. I would use 2 CC of Jonson's baby shampoo per 32 oz of distilled water.
 
STORMCAT said:
As reported, the Shampoo mixture as shown by Proline is on the strong side. I would use 2 CC of Jonson's baby shampoo per 32 oz of distilled water.
Click to expand...

PLEASE GUYS, TAKE BRIAN'S ADVISE TO HEART, MEASURE THE WATER AND SHAMPOO RATIO CAREFULLY... IT IS CRITICAL!!
 
bony said:

PLEASE GUYS, TAKE BRIAN'S ADVISE TO HEART, MEASURE THE WATER AND SHAMPOO RATIO CAREFULLY... IT IS CRITICAL!!
Click to expand...

Warning received and the correction has been made to my set of PDF instructions

Thank you

Shadowman
 
STORMCAT said:
Hello all
Bo from Proline was going to post the instructions but couldn't get on the site. Here's their instructions. They seem to be straight forward. I am not a pro and have not tried the reverse roll process. I used the other method and had great success.
Click to expand...


Thanks for taking the time to post the link, Storm'.
'Have changed the instructions to read "2 cc's" per the update.

I'm taking the coward's way out & handing the instructions to the local tint install pros! :bow
 
Empty Pockets said:
Thanks for taking the time to post the link, Storm'.
'Have changed the instructions to read "2 cc's" per the update.

I'm taking the coward's way out & handing the instructions to the local tint install pros! :bow
Click to expand...

wise move larry....
 
You must log in or register to reply here.

Top Bottom