Search results

To OP: twobjshelbys has given you the recipe to drive you car while you figure it out. Reset the code, drive with a scanner until there is only one monitor that hasn't cleared, Get the emissions test before the CEL is set for the Evap issue. I did this for years until the leak was big enough...

I had the small EVAP leak code on my Lexus. Lexus chased the problem for a few years until a tech finally found it was a filter/line for the gas tank. I got thru emissions testing by clearing the code immediately before driving thru the testing station and testing before the computer could...

Had one but sold it. I think it cross refs to motorcraft CX2002. Double check my memory. Try SUMMIT https://www.summitracing.com/parts/mof-cx2002 or amazon https://www.amazon.com/Motorcraft-Fuel-Vapor-Storg-Can/dp/B000W9LEJU

I had a fuel pump go out and replaced it from my spares. The ford GT pump is unavailable for several months without an availability date. There is a walbro replacement pump with the same voltage tables but a delphi connector which would cause modification.

Grainger part Y-720

I found this a cross reference chart... Brand Sku Type Name Relevance CARQUEST 53-33803 Switch, Oil Pressure W/Lig CARQUEST 53-33803 Switch, Oil Pressure W/Lig Direct Details» AIRTEX 1S9560 Switch, Oil Pressure W/Lig AIRTEX 1S9560 Switch, Oil Pressure W/Lig Direct Details» FORD...

I doubt if you will find it stocked in store. Just pointing out you could get it over night shipped if you had to and Ford isn't the only source. AutoZone ships out of Memphis. They supposedly have it in stock. Probably other chains carry it too. But i just found a chart that says the...

If you want to go Autozone and overnight shipping or local pickup then... https://www.autozone.com/external-engine/oil-pressure-switch/duralast-oil-pressure-switch-ps636/201596_0_8450

Thank You! This is exactly what I was looking for.

I would like to have an additional way of turning on at least the low speed fan and possibly both fans outside the control of the PCM. What would be the safe way of doing this without risking damage to the PCM? I still want to retain control of the fans via the PCM. Perhaps a grounding of an...

Well it is not quite what you are looking to do but you might want to ask the question on the F150 forum where they have discussions such as this: https://www.f150forum.com/f118/2018-adding-adaptive-cruise-control-415450/index3/

My ignition capacitors at the back of the block were accidentally left disconnected. The engine still starts. What is the function of these? Thanks, David

I am looking at the Helm manual and I cannot find where it talks about the parameters for when the supercharger pump turns on. Anybody know when the PCM turns on the supercharger cooling pump? Thanks, David

PM sent

Because Ford will not sell parts for a crate engine, even normal maintenance items. Probably the last time I will use a Ford crate engine in a project car.

No good reason why I didn't use the belt. I got it because I wanted to compare and Ford was being extremely difficult about letting me order a belt from them. Someone high up at Ford did me a favor and got me a belt. As far as my research went, which mainly was how to measure the stock belt...

Searching for Contitech Y-720 points to this for $43.90. https://www.grainger.com/product/CONTINENTAL-CONTITECH-Gearbelt-Type-SilentSync-Helical-45PL36 There is also a number on the box 20038721 as well as a product code of 624-101-090. Again I never ran it as I obtained another belt not...

Same length, width, and tooth pattern as the one from ford. I think it was about $60 but I don't really remember as it was two years ago.

I scoped this out once as Grainger part Y-720 for a replacement belt. That belt from Grainger is made by Continental. Seems to me it as a little bit stiffer. I never installed it. Search the archives.

I decided to start selling parts I am not going to use. I have placed a take-off clutch and flywheel with zero miles on ebay. It was removed from a crate motor I purchased for a project car. Clutch is located in Tucson Arizona...