Search results

I talked with HCF and Ron McCall about some possible trans work and both seemed very capable with the Ricardo transaxle. You mentioned fluid was recently changed, and was curious if any debris was found in the filters.

Looks very nice. Great product for guys doing their own work.

Below are some instructions c/p from SCT's site, assuming you have an X4. Other SCT handhelds are pretty similar. Step 1: Once the device is powered on using the OBDII cable provided, scroll down to highlight “Vehicle Diagnostics”. Press the center button on the X4 keypad to select. Step 2...

I purchased a front splitter just a few months ago from my local Ford dealer.

Atlantis Motor Group has the car listed for $379,900. The pictures present well, but too bad no effort was put into a proper sales prep.

The concept car was yellow, so that must be the color 🍻

Some of the common issues are below. Some cars may never have any of these, but they are the more common issues. Dashboard gauges failing Control Arm boots/Tie link boots dried out and cracked/split Vents in the clamshell are plastic and will deform/melt slightly if driven hard in high temps...

Also interested. Thanks

I put an email into T/A a while back about the lowering perches, and did not get a response. T/A does have a Facebook page, so you might have better luck, if you are a member. There was also a thread a while back, where this was discussed...

In NY, you should already have a title, but with a lien on the title. You bring your lien release, from the bank, to DMV, and they issue a new title, without a lien on it. If the car has not been registered yet, there is no title, since the state DMV issues the title.

The shop manual indicates a margin of 0.13-0.25” for deck lid to roofline/B-pillar, 0.21-0.33” for deck lid to rear fascia, and a swing clearance of 0.07” min. So the swing clearance to very, very tight by design. Checking the gap with a piece of paper is an easy way to determine contact vs...

Adjusting body gaps can get time consuming, as one change to fix something, often creates other gap/alignment issues. There are two torxs and two bolts, in the metal drip well, that hold the overall rear cover in place. There are also two bolts, from the bottom, which can be accessed thru...

The GT book mentioned the E-brake sticking is a common problem, if set when wet, and left for a few weeks.

Probably expiration date.

It only shows the factory muffler in the extra parts, not the catalyst pipes. The catalyst pipes may still be on the car, but not a clear picture of them. If the cats are removed, the car is likely tuned, so the pcm would need to be flashed back to stock In addition to reinstallation of any...

Budget bumper delete, with Ford racing short tips. Just some similar mesh on the frame ends painted black.

Congratulations! Can’t wait to see the picture of all the no stripe GTs.

I have same issue on my 06, and have the hose on order from Ford. The hose was only around $40, but it has been on order a couple of weeks so far. I think it is from aging/drying out.

I believe the paint code is M7049A/TL Satin Silver Metallic. I touched up a few small chips in my console with this paint, and was happy with the match.

5G7Z-17F888-AA should be the cover, if you don’t find it still in the front end.