Recent content by DiegoR

Could you send me details through PM? thanks

Hi, I'm looking to get set of new front sway bar bushings for a 2006 GT which has about 1.5k miles and the front front rattles, and turned out the bushings of the sway bar are shot. So looking for these bushings, is not clear for me, if these are the correct P/N for them or are the links or...

Yes, that's what I came after searching for the Optima replacement. I know it's AGM and is specific charging setup, the Midtronics equipment we have in beyond a standar AGM/LEAD battery charger/diagnose system :) but thecharger needs the specific CCA of the battery to get a accurate report of...

Thanks for the tip guys. The front trunk was open testing the battery with a Midtronics equippment and while turning ON all the loads of the car (electric components) I noticed a inconsistent working operation of the wiper motor. Now fully closed the trunk, the wiper motor will work like it...

Hello board, just wondering if this a known problem (as the dash gauges fail like most know) or perhaps few owners happend the same as this 1k mile GT that is not working properly the wiper motor. The two first positions(speed) doesn't do anything, also doens't work the "tilt down", only works...

Battery seems to be in good health and last time we checked with the diagnostic stations, it passed the test. When I cycle the IGN ON, I wait couple of seconds to come the trip counter display and "self test" (if that happens in a hiden way?) of the cluster before push the Start button, and most...

Now, we can add this GT to the gauge fail list. VAC/BOOST gauge won't read after few attempts or cycling the IGN key or start/shut down the engine. Also the tach among the water temp gauge won't work smetimes. Already read the various threads about the gauge failure so I think this GT will rest...

Thanks for the replies. Seems to be "normal" or at least for the first time. I will be back here if we get any news. Again, thanks for the feedback-suggestions guys.

So I got the car at the shopp to change the transaxle fluid that I finally sourced thanks to a member of here that directed me to a vendor who supply the right fluid. WHile we were draining the fluid, I found bit of (not so "bit") dirty/debris of the oil drain plug seal stuff I guess or the seal...

Any estimate date for official sales? Arround 100k usd is that right? Looks awesome!

Thanks for the tips. Now I need to change the transaxle fluid. I think I need 4 quarts of MOTORCRAFT FLUID - TRANSMISSION #(XT75W90QGT) ? Also, it’s necessary to add Motorcraft rear axle additive friction modifier XL-3 (4 oz. bottle)? If so, how many bottles is needed (I would guess just one...

Thanks for the tips and help all you. We finally managed to bleed the coolant system sucesfully. The only left work to do is change the transaxle oil and S/C oil. All these fluids were factory filled and been like 6 years since and only 900k miles on the clock. The transaxle seems to have a...

Thanks man! I already flushed the clutch fluid and bled the system. I will throw some photos of the car and process today. I found locally the original Motorcraft Gold Coolant stuff, so it will be used all OEM, like it should be :) I'm reading the owners manual at it says, both the intercooler...

In the other hand, we are changing the coolant. Unfortunately, we don't have the Motorcraft Gold coolant stuff arround here so I'm unsure if go with this MOPAR coolant or the MOBIL which is in a drum that doesn't require add water as well. Suggestions between these two? Both are "pink" color...

Thanks man! I'm taking notes of all this. I found few photos in this board where the lift arms should rest uder the GT so it was very helpful! Yes the car is in Lima, the owner is a car nut and have quite collectable cars. I do service and repair some stuff from him, as well his Mustang "GT"...