Yes the day has come, all the ducks are in line and we are moving forward.. Sorry Frank all of the Lazycat, SnoozeCat, Fatcat stuff has come to an end.. And despite this you are still at the top of the list my friend !!:biggrin
This was designed primarily as a bolt in no mods to the car bottle holder. It can also be used as a mini storage area,( cell phone , sunglasses etc.. ) It could also be used as a Gage pod. A gage could be mounted on either side and it would be viewable form the drivers seat. There was a considerable amount of time to make sure it will not interfere with your body or the cars controls. It is also very easy to access and with in your normal range of reach. These were the most important design criteria goals.. They will bolt in rock solid and have a clear film on the base to isolate it from the painted tunnel.
The side graphic is optional. The one shown is approx 5" long. Someone posted that they may want a smaller one. I'll get some 4" ones made up. I'll post some photos of those when they are available. There is the option to get the graphics sticker loose or applied here. If you're on the fence you could get them loose and add them later on your own. As in the past I will hold all payments until your unit(s) ship. If you choose the graphics I will confirm if you want the larger or smaller size prior to shipping..
I plan to develop some other goodies for the POD so having a pair may be beneficial.. Please understand that these are manually cast and all of the processing (ie, painting and flocking ) are manual processes and this stuff take time which costs money.. I've done everything I could to try to keep the costs down.. They will need to be batched painted to keep this affordable so be patient..
Please understand that I have others that manufacture these pieces for me. Of course this is my important project but the reality is it's a very low volume deal for the builders so I have to wait sometimes...:bored
Also understand I put in a lot of my time effort and money to get these things going. They are not big money making projects but I like to be creative and If it benefits someone else I'm happy. I've stated it publicly here. That I'm happy to recoup my expenses. It there is some profit it will go right back it to other GT projects.. I'll say this I'm very creative and a GT life so they'll always be something in the pipeline..:biggrin
I've said this before these are projects I do to share with my friends here. Here are some photos . And yes I have a slightly better leg model this time!! That has been part of the delay.. I've been doing lots of interviews !!:biggrin
Here's some photos and the order form. These will be available in Carbon Fiber with a silver logo. Those are not ready yet. I'll post some photos as soon as they are available. There was more interest in painted fiber glass so those will be produced first. I look forward to your feed back and comments ... Thanks for your patients and support !!:thumbsup
This was designed primarily as a bolt in no mods to the car bottle holder. It can also be used as a mini storage area,( cell phone , sunglasses etc.. ) It could also be used as a Gage pod. A gage could be mounted on either side and it would be viewable form the drivers seat. There was a considerable amount of time to make sure it will not interfere with your body or the cars controls. It is also very easy to access and with in your normal range of reach. These were the most important design criteria goals.. They will bolt in rock solid and have a clear film on the base to isolate it from the painted tunnel.
The side graphic is optional. The one shown is approx 5" long. Someone posted that they may want a smaller one. I'll get some 4" ones made up. I'll post some photos of those when they are available. There is the option to get the graphics sticker loose or applied here. If you're on the fence you could get them loose and add them later on your own. As in the past I will hold all payments until your unit(s) ship. If you choose the graphics I will confirm if you want the larger or smaller size prior to shipping..
I plan to develop some other goodies for the POD so having a pair may be beneficial.. Please understand that these are manually cast and all of the processing (ie, painting and flocking ) are manual processes and this stuff take time which costs money.. I've done everything I could to try to keep the costs down.. They will need to be batched painted to keep this affordable so be patient..
Please understand that I have others that manufacture these pieces for me. Of course this is my important project but the reality is it's a very low volume deal for the builders so I have to wait sometimes...:bored
Also understand I put in a lot of my time effort and money to get these things going. They are not big money making projects but I like to be creative and If it benefits someone else I'm happy. I've stated it publicly here. That I'm happy to recoup my expenses. It there is some profit it will go right back it to other GT projects.. I'll say this I'm very creative and a GT life so they'll always be something in the pipeline..:biggrin
I've said this before these are projects I do to share with my friends here. Here are some photos . And yes I have a slightly better leg model this time!! That has been part of the delay.. I've been doing lots of interviews !!:biggrin
Here's some photos and the order form. These will be available in Carbon Fiber with a silver logo. Those are not ready yet. I'll post some photos as soon as they are available. There was more interest in painted fiber glass so those will be produced first. I look forward to your feed back and comments ... Thanks for your patients and support !!:thumbsup
Attachments
Last edited: