whipple dyno no's

[nz05gt]

dyno result from whipple
735rwhp @ 6500rpm @16.5 lb
741rwt @4689rpm@14.3 lb
17lb pully / pump gas /no timming:
cheers NZ05GT

 

[HHGT]

dyno result from whipple
735rwhp @ 6500rpm @16.5 lb
741rwt @4689rpm@14.3 lb
17lb pully / pump gas /no timming:
cheers NZ05GT

Wow!!!

 

[PL510*Jeff]

double WOW

 

[tmcphail]

Very Nice :cheers

 

[nz05gt]

thanks
I have to thank "brown bro's racing" in vancouver for the tune.
only had time to do 2 pulls still have to clean up the AFR its still to uneven across the pull.
p.s. it has custom headers and a cold air box.
on a different subject I am running michelin 345/30x19 pilot cup sport rears and 265/35x18 fronts with no abs issues .just did a 4 hour enduro yesterday these tyres are great for a DOT tyre.unfotunatly we sheared the r/rear wheelstuds of while running second. oh dear how sad never mind.
:cheers
NZ05GT

 

[PL510*Jeff]

thanks
I have to thank "brown bro's racing" in vancouver for the tune.
only had time to do 2 pulls still have to clean up the AFR its still to uneven across the pull.
p.s. it has custom headers and a cold air box.
on a different subject I am running michelin 345/30x19 pilot cup sport rears and 265/35x18 fronts with no abs issues .just did a 4 hour enduro yesterday these tyres are great for a DOT tyre.unfotunatly we sheared the r/rear wheelstuds of while running second. oh dear how sad never mind.
:cheers
NZ05GT

Sounds like a big ouch.:ack

 

[jdoc7]

Holy smokes, those are strong numbers! :thumbsup

 

[Empty Pockets]

double WOW

Well, your pulley & tune results weren't too shabby EITHER, Jeffey!

 

[Gulf GT]

thanks
I have to thank "brown bro's racing" in vancouver for the tune.
only had time to do 2 pulls still have to clean up the AFR its still to uneven across the pull.
p.s. it has custom headers and a cold air box.
on a different subject I am running michelin 345/30x19 pilot cup sport rears and 265/35x18 fronts with no abs issues .just did a 4 hour enduro yesterday these tyres are great for a DOT tyre.unfotunatly we sheared the r/rear wheelstuds of while running second. oh dear how sad never mind.
:cheers
NZ05GT

What's the cold air box your running?

 

[soroush]

and who made the headers?

 

[nz05gt]

thanks guys
just got to work 7.30 am
I made the headers and cold air box if I new how to post pic's I would so I put some pic's off the cold air box in my photo album
Note This is the proto type to see if it worked, It was built out of nessesity as I have an cock pit adjustable blade bars and the std air box was in the road.
:cheers NZ05GT

 

[nz05gt]

Sounds like a big ouch.:ack

Unfotunatly it bent the right rear lower "billit" A-arm, rear chassis extension,bumper, cracked rear panel,and diffuser :thumbsdow.
now I have 2 weeks to fix her for a 6 hour race on the 17th may:banana
NZ05GT