Something a little different
- Thread starter nz05gt
- Start date
WOW..........That is different!!!! I've never seen that type of lugnut used on the rear wheels of a GT before!!!!
Chip
FlorIdaho Chris
Yeah, I've got one.
GTFUN
GT Owner
Speed secret.
Gentlemen,
Most of the really hot Ford GTs have "yellow" springs on their Penske shocks. :biggrin
Chip
Gentlemen,
Most of the really hot Ford GTs have "yellow" springs on their Penske shocks. :biggrin
Chip
Attachments
Superfly
HERITAGE GT OWNER
And it looks like the rear clamshells keep blowing off those bad boys too! :wink
REALLY COOL shots NZ05GT. Thanks for sharing them.
REALLY COOL shots NZ05GT. Thanks for sharing them.
MAD IN NC
Proud Owner/ BOD blah bla
Look like ya have been busy Neil..... That bracing look extensive. Did you find twisting occuring?
What are the two cans for mounted on each side of the bracing toward the front of the engine if you don't mind filing us in...
BTW - there is a market for the old "billet'd" control arm.... I'll start the bidding at $10 USD! :rofl
What are the two cans for mounted on each side of the bracing toward the front of the engine if you don't mind filing us in...
BTW - there is a market for the old "billet'd" control arm.... I'll start the bidding at $10 USD! :rofl
Last edited:
Gulf GT
GT Owner
JKR
GT Owner
The two cans are engine breathers as I don't need oil in the intake as it causes detonation.
The spring are 600lb on the rear and 500lb front with custom valving in the penske dampers, also they are 2 inches shorter then STD,
The spring are 600lb on the rear and 500lb front with custom valving in the penske dampers, also they are 2 inches shorter then STD,
They are michelin pilot sport cup tyres 345/35 19 rear and 265/35 18 front.
the out side is allmost a slick with hole in it as it takes all the load when racing:cheers
Neil
NZ05GT
