FS FRPP/Borla Long Tube Headers

[Xcentric]

$1,250 + UPS from 34251. These headers are used and repaired (more on that below). Selling because Borla replaced the headers under warranty and I don't need spares.

List price on the Borla website is $3,960.99 (Part #17253).

The headers were ceramic coated by Jet Hot when new ($300). They have some scuffs and scratches from installing/deinstalling.






Two small tack welds failed causing an exhaust leak. See two photos below.






There are eight of these small welds. They are the welds just after the slip joint and near the rear O2 sensor bung (first two photos). I had all eight welds re-welded. See photo below for a close up of a repaired weld.

 

[2112]

Wow, Replaced under warranty all these years later.

Incredible customer service.

 

[Xcentric]

They are only three years old, but yes, replaced with no questions. Million mile warranty. They had to fabricate them, because they no longer keep any in stock.

<<< And, you can see from my avatar that they are internally flame annealed.

 

[2112]

Love mine.

GLWS!

 

[Propdave]

Could I use this setup with my heffner catback? Would it be a direct bolt on?
Thanks

Dave

 

[Sinovac]

Could I use this setup with my heffner catback? Would it be a direct bolt on?
Thanks

Dave

Yes

 

[Propdave]

I'll take them.

Thanks

Dave

$1,250 + UPS from 34251. These headers are used and repaired (more on that below). Selling because Borla replaced the headers under warranty and I don't need spares.

List price on the Borla website is $3,960.99 (Part #17253).

The headers were ceramic coated by Jet Hot when new ($300). They have some scuffs and scratches from installing/deinstalling.

View attachment 46320

View attachment 46324


Two small tack welds failed causing an exhaust leak. See two photos below.

View attachment 46321

View attachment 46322


There are eight of these small welds. They are the welds just after the slip joint and near the rear O2 sensor bung (first two photos). I had all eight welds re-welded. See photo below for a close up of a repaired weld.

View attachment 46323

 

[FrankBarba]

Beat me to it.

 

[Xcentric]

PM sent.

 

[Propdave]

PM sent back. Thanks

 

[Xcentric]

Sold!

I don't know if I've heard a long tube header + X-pipe combo. Should be incredible. The sound will echo off the east face of the Rockies. Shesgotlegs will hear it in Ontario. May cause landslides on the Athabasca Highway.

 

[beckertb]

Sold!

I don't know if I've heard a long tube header + X-pipe combo. Should be incredible. The sound will echo off the east face of the Rockies. Shesgotlegs will hear it in Ontario. May cause landslides on the Athabasca Highway.

I run the long tube headers and Heffner H-pipe on the black car. It is an aggressive sound for sure.