Fog Light Covers

[ultrasportracing]

Anyone have this problem with bad fit of fog light covers

 

[roketman]

I use 3m clear bra

 

[KJRGT]

Ron,
I think the question refers to the large gap between the clear lens and the corner panel of the front fender.
I've never seen or read about it. Hopefully others can provide insight.

 

[STORMCAT]

Anyone have this problem with bad fit of fog light coversView attachment 24355

It looks like that tab should be inisde the opening to hold the lens in place

 

[Art138]

To the left of the lens,pic shows (and might be a flash shadow) some scrape marks...the bumper flexs...just wondering it you impacted anything that might have caused it to pop out...

 

[Specracer]

Is it because the bumper cover is not on the car, and therefore not supported by the car, such it is sagging, and the cover is not staying seated properly?

 

[shelbyelite]

A lot of times it wont fit right UNTIL you have mounted the front bumper on the car itself as it holds the bumper in a different shape than when its off the car

 

[ultrasportracing]

Thanks guys, I thought that may have been the reason..

 

[roketman]

Ron,
I think the question refers to the large gap between the clear lens and the corner panel of the front fender.
I've never seen or read about it. Hopefully others can provide insight.

My oversight .You are correct.The tab should be on the inside ! DUH!

 

[ultrasportracing]

Bumper waqs undamaged,, just a trick of the light.( no scrape marks) speckles seem to be in the pic as they are not on the bumper

 

[MNJason]

Any way to remove these covers with the bumper ON the car? I'd like to clean around that area!