Exhaust manifold gaskets and alignment shims?

[Rockstar]

I am looking to find exhaust manifold gaskets Ford part # 4G70Z9448AA
that someone may have a less expensive sorce. The Ford dealer wants about $200 for 4 gaskets needed. I also am looking for front and rear alignment washer shims that are 1mm and 2mm thick, they dont even half to be anidised aluminum. Ford only offers 4,5 and 6 mm I am told. If I had 1 and 2mm I could dial in my alignment better. Thanks much guys.

 

[jaxgt]

call or email Torrie (a sponsor here). He can help with Ford parts, as can some others

 

[RALPHIE]

Torrie should be able to help.

I got a set of four 4G7Z-9448-AA a couple of years ago for $171.84 from Fordparts.com - they are now called www.TitusWillFordParts.com/

If Torrie can't get them for you, I would also check with Leo Capaldi Racing at www.capaldiracing.com

 

[soroush]

ive been using percy's gaskets for gt500 on my black and now on the blue car its an inexpensive alternative, they have two different types, "seal4good" made out of malleable metal that deforms under pressure to seal and a carbon based fuzzy looking gasket(thats the best I can describe it). I have used both and been very happy with them,, I has the carbon on my black car and now have the seal4good on the blue car. they are very cheap around 30 to 40$ for the whole set

http://www.percyshp.com/xxcarbon.html

http://www.percyshp.com/seal4good.htm

 

[tmcphail]

I can get all of these parts for you email me if still needed


[email protected]

 

[BlackICE]

ive been using percy's gaskets for gt500 on my black and now on the blue car its an inexpensive alternative, they have two different types, "seal4good" made out of malleable metal that deforms under pressure to seal and a carbon based fuzzy looking gasket(thats the best I can describe it). I have used both and been very happy with them,, I has the carbon on my black car and now have the seal4good on the blue car. they are very cheap around 30 to 40$ for the whole set

http://www.percyshp.com/xxcarbon.html

http://www.percyshp.com/seal4good.htm

Are the GT500 heads and gaskets the same as the FGT?

 

[tmcphail]

Head - no
Head Gasket - no

 

[BlackICE]

Head - no
Head Gasket - no

Thanks, Torrie.

But the exhaust manifold gaskets are the same for the FGT and GT500?

 

[tmcphail]

Yes.