Check your nuts. . .


Sinovac

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,864
Largo, Florida
on the studs that secure the top painted clamshell vents. I lost one and when I checked the others they were very loose. It seems they should be lightly torqued so the studs don't break and the inner clamshell isn't damaged. I will apply some mild Loc-Tite.
 
Well mine are fine.

I'm going outside to check the car now.:biggrin
 
1418 said:
Well mine are fine.



I'll have to wait till the wife comes home.:frown
Click to expand...
 
1418 said:
Well mine are fine.

I'm going outside to check the car now.:biggrin
Click to expand...

Too damn funny. :lol:lol:banana:banana
 
Put some red locktite on mine, some dripped on my zipper and now I have to cut off my new trousers!
 
GREAT catch !!

I just checked mine as there were 3 already about to come off and a couple others that were barely finger snug....

A "bit-O-Lock-Tite" became the word of the day

Thank you again

Shadowman
 
Mine were nice and snug then again I lost a coolant hose at the top of 4th gear under WOT. I guess this makes up for it :wink:wink
 
Do I have to turn my head and cough when I check them?
 
steve592 said:
Do I have to turn my head and cough when I check them?
Click to expand...

Like the stripes thats optional :lol
 
Not at all...
Simply apply generous ammounts of Purple K-Y lubricant...
And wait for the results...
Dr. Chris will advise the results shortly :)
 
Not at all...
Simply apply generous ammounts of Purple K-Y lubricant...
And wait for the results...
Dr. Chris will advise the results shortly :)
 
I am having a bit of trouble getting them torqued to the correct specs.... should I shave them first?
 
Shaved Nuts

steve592 said:
I am having a bit of trouble getting them torqued to the correct specs.... should I shave them first?
Click to expand...

:willy:willy:willy:willy:willy:willyWatchout for the Alcohol rub!
 
yep, good catch the left center ones were loose and hanging low.
 
cobrar1339 said:
yep, good catch the left center ones were loose and hanging low.
Click to expand...


watch out this guys got six nuts at least! left center :willy:willy:willy
 
I enjoyed checking mine so much... that I'm going to go check 'em again!



Btw-some were loose. Thanks for the heads up.
 
You guys are SICK!
 
All mine were loose, some about to come off.
Seems a few of them broke off the other end.

Where's Kip with the CF ones. I'm starting to think the CF console is worth doing, did the parking brake piece ever get done too? I didn't like the look of the console and not the brake.
 
After reading all of the 'nuts' comments, I thought, well. I need to check my
nuts,..........sure enough, .... I had loose nuts too......

Put a dab of Locktite on each one, & am hoping for the best......

Since this was mentioned, I started looking at all of the other hardware & other parts on the clamshell, & all look good & tight.......

Note: Some of the vent fittings were just finger tight, & I never even thought of looking at them until I read this forum....
.....This WAS a good find, so all of you need to check yours.....

Casper
 
You must log in or register to reply here.

Top Bottom