I need to make room for my '05 GT
1996 Cobra coupe for sale by the original owner
22,800 miles
All original Black paint (a few minor rock chips and very light scratches)
Black leather interior (minor/normal wear on the driver's seat)
Mach 460 stereo
Original engine and 5-spd transmission
The car has the following mods:
Griggs tubular K-member
Griggs tubular A-arms
Griggs Bump Steer Kit
425# coil over springs on Tokico Illumina adjustable struts
Griggs Caster/Camber plates
Flaming River steering shaft
Griggs Severe Duty Torque Arm
Griggs Heavy Duty Panhard Rod
Griggs 350# rear springs with Tokico Illumina adjustable shocks
Global West rear lower control arms
Steeda subframe connectors
FMS 3.73 gears
FMS Cobra R wheels with BFG KDW 275/40ZR17 tires
Griggs/Kooks 1 3/4" stainless long-tube headers
Dr Gas off road x-pipe (3" to 2.5")
Dynomax Ultra Flow stainless cat back (2.5")
PRO-M 77mm MAF
WMS ceramic coated Velocity Tube (MAF to TB)
Accufab single blade throttle body
Paul Svinicki PHP Stage 2 intake manifold
IMRC Deletes (I have an unmolested set of IMRCs and a controller.)
ASP underdrive pullys
Chris Johnson Motorsports tuned Superchip
Steeda Tri-Ax shifter
The last trip to the dyno netted 311 rwhp and 287 lb/ft. Mobil 1 oil always used. The Cooling TSB was performed in 1998. Never made it to the track. No accidents. Clear title.
Let me know if you have any questions. The car is located in Yuma, AZ. Thanks for looking.
$14,000 or best offer
Best Regards,
Waldo
1996 Cobra coupe for sale by the original owner
22,800 miles
All original Black paint (a few minor rock chips and very light scratches)
Black leather interior (minor/normal wear on the driver's seat)
Mach 460 stereo
Original engine and 5-spd transmission
The car has the following mods:
Griggs tubular K-member
Griggs tubular A-arms
Griggs Bump Steer Kit
425# coil over springs on Tokico Illumina adjustable struts
Griggs Caster/Camber plates
Flaming River steering shaft
Griggs Severe Duty Torque Arm
Griggs Heavy Duty Panhard Rod
Griggs 350# rear springs with Tokico Illumina adjustable shocks
Global West rear lower control arms
Steeda subframe connectors
FMS 3.73 gears
FMS Cobra R wheels with BFG KDW 275/40ZR17 tires
Griggs/Kooks 1 3/4" stainless long-tube headers
Dr Gas off road x-pipe (3" to 2.5")
Dynomax Ultra Flow stainless cat back (2.5")
PRO-M 77mm MAF
WMS ceramic coated Velocity Tube (MAF to TB)
Accufab single blade throttle body
Paul Svinicki PHP Stage 2 intake manifold
IMRC Deletes (I have an unmolested set of IMRCs and a controller.)
ASP underdrive pullys
Chris Johnson Motorsports tuned Superchip
Steeda Tri-Ax shifter
The last trip to the dyno netted 311 rwhp and 287 lb/ft. Mobil 1 oil always used. The Cooling TSB was performed in 1998. Never made it to the track. No accidents. Clear title.
Let me know if you have any questions. The car is located in Yuma, AZ. Thanks for looking.
$14,000 or best offer
Best Regards,
Waldo
Last edited: