1181 Whp 1068 Wtq


Dwight

Well-known member
Apr 4, 2006
51
Jacksonville, Fl
Got Joe's car back on the Dyno today and had some good results. Still want to break 1200 WHP with the GT35R's. This was with the new long block and fuel system.

dyno_fordgt_1181.jpg
 
So who built the longblock? What camshafts? How much boost on the GT35's for the above run?
 
:eek :cheers
 
Wow! Those are pretty amazing peak numbers. Truly impressive. I think that car will be great for bragging rights and on the strip with slicks and skinnies, but for the street on street tires or on a road course I would imagine that car would be undrivable and downright scary.

Does anyone know how this car will be used?
 
Fess up, tell us more. Great numbers, WOW!
 
traction control
 
Wow! So new fuel system. It made over 1000 on the stock system didn't it?
 
bigger fuel delivery (BUT not noisier) ,,stronger rods, and pistons and 27.5 PSI at 115 octane BETTER cams, and springs AS WELL AS ported and polished heads.60 lbs INJECTORS..

I BELIEVE WE HAVE REAChed THE LIMIT OR CLOSE TO THE LIMIT OF THESE TURBOS...

3RD GEAR NOW IS VERY VERY SHORT TRACTION IS NOT A PROBLEM IN 3RD
HIGHER RPM'S IN SECONDBREAK THE TIRES LOOSE... SO THERE WILL BE BOOSt CONTROL MANAGEMENT OF SOME KIND I WILL LET THE STAGE 6 GUYS FILL IN THE BLANK


imo 1ST GEAR ONLOW BOOST IS 680 rwhp ON HOOSIERS
2ND IS 1080 WITH FULL TRACTION
3RD IS 1200WITH FULL TRACTION
4TH IS ???



joe
 
Impressive Joe. :eek

re top end traction: In the GT Tech forum, Neil Hodgson is quoted about his plans for a race car and the author of this report writes, "One thing the GT won't get is the high wing seen on many road racers, a testament to its aerodynamic prowess. Hodgson plans to replace the fixed gurney flap with an adjustable unit, but the rear end already pulls 1 g of drag. "If you pull it up another quarter-inch, it doubles the downforce," he says. "It's very efficient just the way it is."

So maybe a taller gurney flap will help you when you are on the road. Have you considered this?
 
Very impressive guys . good to see someone pushing the envelope on this car .Is there any chance we could get you guys to post the HP vs RPM dyno chart as well ? Thanks Bill
 
and of course..how much?