Search results

I bought a set of clear splash guards from someone on the forum a couple years ago and they were very nice. I need another set and want to either buy them from someone who also bought them but did not use them or find the guy and beg him to make me another set. I need them in the next 3 or...

Anyone going TT and want to sell a 4L polished. Interested. Also want a pair of used CATs. Cheap.

I was going to change the coolant and put springs in my radiator return hoses and noticed the pipe that feeds the radiator has a nasty fitted bend in it and is rubbing on the intercooler return pipe. The poor bend looks like a significant restriction concidering it's small size and the flow it...

The advertized HP gain is rather small for this $600 device. I see it on Whipples. Is it better for a pullied engine? Does anyone have any performance data from dyno runs with and without?

Greetings. There was another post some time ago on the Dash Daq. I have an opportunity to get a little deal on several of these if anyone is intersted. Granted we have most of the useful info on our dash already and this thing is not really necessary. If you watch the demo sequence on the...

I have a ford quality steel pulley and roush belt brand new that I don't need. I just put one on my car and a buddy changed his mind and left me with this spare. The belt is a smidge shorter than the stock belt and a little higher quality. It does not come with a Tune. I'm going to the dyno for...

I looked at the service manual and it shows a gismo set for siphoning the gas out of the tank. I made up a gismo set like it but can't get the tube in the tank. It goes down the neck a couple of feet and hits something. I didn't taper cut the end of the tube so mabe it is just hitting a lip...

I need a picture if the sequential turn signal relay and sequencer panel mounted on the driver side wheel house. If someone has a 67 or 68 Shelby and could take a picture or two it would help me reconstruct mine. A measurement between the mounting holes would also be appreciated. Don

If any turbo people want to discard the stock air filter box. I'm interested in one.

The updated Sherwin Williams formula for super silver JX-12224 is: GORSE - 324.1 U7-002 series Color U7080 - 333.4 Color V6V175 - 355.9 Dryer T1F270 - 443.9 Flatner The first item used to be F5S-101 which is no longer available. Use DH-653 Hardner and DR-733 Reducer when spraying. I...

Where is a good place to buy the SVT 2 piece rotors? $1,999 a pair is not reasonable.

I was pretty disappointed with the Mac system until I finished the subwoofer relocation project. I have now flipped 180 degrees and really like it. Thanks to all for the idea. I posted pictures in the photo album to show how I did it. I used the inside dimensions of the wood box but...

I noticed in the shop manual there is/should be/was a heat shield between the air filter box and the muffler. I don't have it. Do you? Did it go the way of the do do bird in 2005? I have a 2006. :confused

Try this link: http://64.62.242.228/GT/GT%20Fun.wmv :thumbsup

Here is a terrific Trickle Battery Charger that I have used for a number of years on my batteries. I was able to obtain a few of these but I don’t know how long they will be available. The Charger will provide 500 milliamperes (one half amp) to bring a battery up to full charge and taper off...

I found an old stash of Neodymium – Cobalt Super Magnets that work perfect for oil drain plug magnets. You can simply stick them on the end of your drain plug since they are very strong, or drill them into the end of the plug with a quarter inch bit. You can have 3 of these magnets for $20.00...

Here is a terrific Trickle Battery Charger that I have used for a number of years on my batteries. I was able to obtain a few of these but I don’t know how long they will be available. The Charger will provide 500 milliamperes (one half amp) to bring a battery up to full charge and taper off...

I found an old stash of Neodymium – Cobalt Super Magnets that work perfect for oil drain plug magnets. You can simply stick them on the end of your drain plug since they are very strong, or drill them into the end of the plug with a quarter inch bit. You can have 3 of these magnets for $20.00...