Xpel/Clear Wrap on NGT


GEE-TEE

GT Owner
Mark IV Lifetime
Le Mans 2010 Supporter
May 1, 2009
617
Calabasas, California
I always wonder how long should owners wait for the paint to dry, cure and get some sun on it before having an adhesive wrap applied. In my experience the paint does not adhere as strongly to non-metal body panels and there is a risk of paint peeling off when the vinyl is being removed. I recall when I had my old Saleen wrapped and then after I sold it, I told the buyer who wanted to remove the wrap to take it to the same place or a specialist. But he didn't listen and went to local body shop to have them remove the wrap. The result was the paint peeled off from the plastic portions of the Saleen panels. I still gave him $800 in good faith afterwards and he was grateful but still it was bad. I would think waiting a few months for the paint to really cure makes more sense than applying wrap immediately after taking delivery. Especially since the NGT is all CF. What are your thoughts on this?
 

Xcentric

GT Owner
Mark II Lifetime
Jul 9, 2012
5,213
Myakka City, Florida
New wraps are MUCH improved over the old stuff, including adhesive release. Still need somebody experienced to do it. If the paint is 30 days old, that's plenty (I've been told).
 
  • Like
Reactions: Ed Sims and GEE-TEE

dbk

The Favor Factory™
Staff member
Le Mans 2010 Supporter
Jul 30, 2005
15,187
Metro Detroit
You will be able to get an end date from the Concierge on the last day your GT was painted. Or rather they will at least give you a buffer on how long you should wait to apply clear bra. In all likelihood you won't see it for at least 6 weeks after last date of paint anyways.

This is (partially) why they don't offer any kind of factory clear bra option.
 

SPI

Well-known member
Nov 28, 2018
123
Chicago
The most important Factor is "WHO" is installing the PPF and "WHAT" they are USING to cut the PPF.

I have been building SEMA Project Vehicles for the past 15 years. We are a wholesale distributor supplying to over 134 specialty shops & dealers. I have seen it all.

I have seen so many expensive vehicles that have been CUT by Razor Blades by Authorized PPF Dealers. This was a discussion that I had with these manufacturers at SEMA 2018. They are aware of this issue in secret and are pushing dealers to buy plotters and the template program. Unfortunately, dealers do not want to invest $5K in a plotter and pay for the software membership. But they want to still charge $6K starting for a full wrap on 1 car!!!!! The plotter alone will not trim everything for you. There will no matter what be the BLADE that will be used in certain areas.

Unfortunately, vehicles owners won't notice their vehicle's have been cut until its taken off.
 
  • Like
Reactions: GKW05GT

Specracer

GT Owner
Mark IV Lifetime
Nov 28, 2005
7,081
MA
Hopefully your enthusiasm for your allocation will have you continue to spend more time here. When you do, you will find that the questions you are asking have been thoroughly discussed at great length.

Just about every NGT belonging to forum members has a FULL wrap. Most have Xpel. Absolutely installation quality is very important. For me the risks, were worth it, to have the protection that the films offer. We are very luck to have a really good team on installers that have done at least 6 GTs that I know of (combination of new and old)

You do not have your location listed with your screen name, perhaps share that, to get some installer suggestions.
 

DakotaGT

GT Owner
Mark II Lifetime
Dec 9, 2012
1,694
Sioux Falls, South Dakota
This topic has been my chief concern, since receiving the joyful news about receiving an allocation. Here in Sioux Falls, there is nobody I trust to do the job (which is essential to enjoy driving this car). The local guys here in Sioux Falls are barely adequate to PPF my Demon, McLaren, etc but this car needs a true expert, preferably one already familiar with this car. I may have to have the car delivered to me, and then ship it off somewhere, which isn’t very ideal or efficient, in terms of time and $.
 

jaxgt

GT Owner
Mark IV Lifetime
Jul 12, 2006
2,794
Clint - first off congrats, second off, i was in same situation.

PM me and I can tell you what i am doing re Xpel
 
  • Like
Reactions: Pat Milliken Ford

DakotaGT

GT Owner
Mark II Lifetime
Dec 9, 2012
1,694
Sioux Falls, South Dakota
Clint - first off congrats, second off, i was in same situation.

PM me and I can tell you what i am doing re Xpel

Thanks, Mitchell- PM incoming
 

DanM

GT Owner
Mark II Lifetime
Le Mans 2010 Supporter
Mar 31, 2006
49
Stillwater, MN
Clint. My car has finally passed the cure date and is being picked up today for film next week. I am working through Morries ford in Minnetonka with the recommendation of my neighbor who received his Ford Gt last year and had the same installer. I can pass on contact info if you need it. Morries owns Bentley/Aston Martin/Maserati in town as well.
 
  • Like
Reactions: DakotaGT

B.M.F.

GT Owner
Mark II Lifetime
Jan 29, 2009
1,782
Minnesota
Clint. My car has finally passed the cure date and is being picked up today for film next week. I am working through Morries ford in Minnetonka with the recommendation of my neighbor who received his Ford Gt last year and had the same installer. I can pass on contact info if you need it. Morries owns Bentley/Aston Martin/Maserati in town as well.

Midwest clear bra is the best in Minnesota.
 
  • Like
Reactions: DakotaGT

DakotaGT

GT Owner
Mark II Lifetime
Dec 9, 2012
1,694
Sioux Falls, South Dakota
Midwest clear bra is the best in Minnesota.

Clint. My car has finally passed the cure date and is being picked up today for film next week. I am working through Morries ford in Minnetonka with the recommendation of my neighbor who received his Ford Gt last year and had the same installer. I can pass on contact info if you need it. Morries owns Bentley/Aston Martin/Maserati in town as well.

Thank you, Dans. I know somebody else from SD going through Morrie's soon, so I may see how he fares. Sounds like a couple of good options!
 

Gary

GT Owner
May 11, 2006
471
Festus, Missouri
Soaking it all in for future reference. Thanks to all.
 

roketman

GT Owner
Mark IV Lifetime
Oct 24, 2005
7,994
ma.
We have a really good PPF company in Ma. They have done my cars and Specracers
 

usmcfred

GT Owner
Mark II Lifetime
Oct 26, 2006
546
Massachusetts
"We have a really good PPF company in MA. They have done my cars and Specracer's"

The same MA team did my NFGT as well. Excellent job.

usmcfred
 

Ed Sims

GT Owner
Mark IV Lifetime
Apr 7, 2006
7,850
NorCal
Most film installers will want to go 10%+ over size on the pattern & trim with blade to exact fit. A good installer can trim the film & not touch the paint.

Ed
 

GT Venum

GT Owner
Mark II Lifetime
Dec 4, 2010
325
Wisconsin
I have been in the film business for almost 10 years now. Be very careful when picking an installer, I have seen a lot of cut paint over the years.
 

SPI

Well-known member
Nov 28, 2018
123
Chicago
I have been in the film business for almost 10 years now. Be very careful when picking an installer, I have seen a lot of cut paint over the years.

GT Venum Thank You.

I don’t think these guys on this Forum are comprehending how sharp a blade can be and how much damage a dull one can be.

I still teach window tinting but I no longer teach PPF.

I have only 1 installer that made the cut to install PPF. He has been with me for 9 years.

When I get my GT I will be micro managing the project from start to finish. I won’t even blink .

If you guys need help in any advice to screen your installer/ shop.

Feel free to PM me.
 

Gary

GT Owner
May 11, 2006
471
Festus, Missouri
can you order the film pre-cut with a margin from a vendor with the equipment and the dimensions. are all the NFGT's exactly the same body wise?
 

GKW05GT

GT Owner
Mark II Lifetime
May 28, 2011
2,755
Fayetteville, Ga.
You can order direct from Xpel, they show the patterns on website but price is very high direct.
 

SPI

Well-known member
Nov 28, 2018
123
Chicago
You can order direct from Xpel, they show the patterns on website but price is very high direct.

Those prices are over inflated and you still have to install them. I have the templates and can plot them for you if you need them.