trransaxle fill plug size?


What size socket fits the transaxle FILL plug? I know the drain plug is a 32 mm, but don't know the size of the fill plug.

Thanks!
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
 
I'm afraid this thread did not answer my question - it gives one size (1 1/4) without specifying which plug it applies to, but then states there are three different sizes for the fill and two drain plugs .... :confused
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
I guess that wasn't very helpful. I don't recall the size of the fill plug, but it is smaller than the transmission filter plug (driver side). I believe the transmission filter plug is the 1 1/4" (32mm) dimension. Remember there is another drain plug on the passenger side of the sump. Sorry for the mediocre answer.

IMG_9544.jpg

IMG_9581.jpg
 
Last edited:

BlackICE

GT Owner
Nov 2, 2005
1,416
SF Bay Area in California
Most sockets don't fit well unless they have very thin walls.
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
I use an open end wrench on the filter plug for that reason. It seems there is a slight difference in tolerance between transaxles which permit or prevent the use of a socket on this plug.
 

BlackICE

GT Owner
Nov 2, 2005
1,416
SF Bay Area in California
I use an open end wrench on the filter plug for that reason. It seems there is a slight difference in tolerance between transaxles which permit or prevent the use of a socket on this plug.
I had to too, but I prefer a box wrench or socket so that I have 6 points of engagement rather than only 2.
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
I just used an old set of vice grips when I changed the fluid on GT35065's car. :lol
 

Lorenzo

GT Owner
Mark II Lifetime
Dec 28, 2008
626
U.S.A.
gt.jpg
Here is what I use, However I don't fill through the "Filler Hole"
I put my oil in through the odometer sensor opening.
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
Thanks Lorenzo. I was mad that I didn't write the sizes in my manual.
 

fjpikul

GT Owner
Mark IV Lifetime
Le Mans 2010 Supporter
Jan 4, 2006
11,507
Belleville, IL
Don't forget an extra 1.5 quarts with the cooler if you have one.
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
quaerts with the coller

Are you still hung over?

I see your Ninja spell correction skills are still sharp.
 

fjpikul

GT Owner
Mark IV Lifetime
Le Mans 2010 Supporter
Jan 4, 2006
11,507
Belleville, IL
I fixed it while you were typing. Look for the poll.
 

Lorenzo

GT Owner
Mark II Lifetime
Dec 28, 2008
626
U.S.A.
If you are buying your oil from your local Ford dealer be sure to check the label to make sure it is the XT-75W90-QGT ( specific ) for the Ford GT !!
Every time I ask for it They give me the bottle that looks almost exactly the same marked 75W90 for some other application.
 

Sinovac

GT Owner
Mark II Lifetime
Jul 18, 2006
5,832
Largo, Florida
^Yes. You know you have the right stuff when you must sell a kidney to buy it.
 
Filler size

I'm not draining it, just want to check the level.

Thank you all for your help!!!