I know you guys are getting tired of the billet bling that our machinist is bringing to the table but with the economy as bad as its been he has been pretty bored so he has been making plenty of stuff for us. Here is an oil filter cap cover that we had done and it has several purposes. 1. BLING:banana 2. an easier way to remove the cap when doing the oil change. 3. avoid dinging up the OEM cap when doing oil changes.
Picture 1 is the cover without the OEM cap inserted
Picture 2 is with the center cap removed showing the 3/8" square hole so you can insert your 3/8" extension to remove the cap without scaring the OEM plastic
Picture 3 is with the OEM cap installed inside of the bling
Picture 4 & 5 are with the cap installed on the car. The way this cap works is you slide the new bling over your OEM cap and tighten all the outer allen screws as this process tightens the bling to the cap nice and snug.
OK you can tell me what you really think:thumbsup
Picture 1 is the cover without the OEM cap inserted
Picture 2 is with the center cap removed showing the 3/8" square hole so you can insert your 3/8" extension to remove the cap without scaring the OEM plastic
Picture 3 is with the OEM cap installed inside of the bling
Picture 4 & 5 are with the cap installed on the car. The way this cap works is you slide the new bling over your OEM cap and tighten all the outer allen screws as this process tightens the bling to the cap nice and snug.
OK you can tell me what you really think:thumbsup