Ford GT under the hood products, limited production run

[RALPHIE]

Andy/Jake -

I'll be in for the complete door sills - Name, VIN, Year, etc. I'll pm you all the information. Thanks for doing this for us.

Ralphie

[Magic]

Count me in for a set of the door sills with Name, Vin, Year. Appreciate the efforts getting this together.

Magic

[dpdive]

We need 20 sets in order for Jake to make them. I'll take 2 sets. Eventually they will get scratched so I'll keep 2 sets for spares.

[twobjshelbys]

On the sill plates: A little detail on how to install? Do they stick over the factory ones?

[dpdive]

They will fit over the stock sill plates but look best if you take OEM off which are held on with tape. Taking off the OEM's destroys them but new are available at reasonable cost. I bought new ones from Torrie so I could change back.

[twobjshelbys]

They will fit over the stock sill plates but look best if you take OEM off which are held on with tape. Taking off the OEM's destroys them but new are available at reasonable cost. I bought new ones from Torrie so I could change back.

Thanks. Believe it or not mine still has the blue plastic tape covering them. I don't want to take it off because my feet drag across. But someday I'll do it. I've already got scuff marks on the door by the speakers so I guess I shouldn't worry about it too much. Now I'm starting to think of the CF door inserts just to preserve the originals.

How do these attach? Can they be remove and survive? I'm thinking about what it would take to put it back to Factory, but as I think about it when I did the same thing with the Shelby GT I never looked back.

[Specracer]

I have my door sills wrapped in "clear bra" Solves the issue you have, and will allow you to peel the blue.

Thanks. Believe it or not mine still has the blue plastic tape covering them. I don't want to take it off because my feet drag across. But someday I'll do it. .

[Waxer]

I have my door sills wrapped in "clear bra" Solves the issue you have, and will allow you to peel the blue.

+1. But I think I going to do those sills. They are sharp!

[STORMCAT]

Hey All!

After discussion with our carbon supplier we have decided to offer up the door sills if we get enough orders. Please see info below and contact us at sales@project321.com or 877.584.7321 if you'd like to place an order or have any questions. No PMs please, it is extremely difficult for the staff to keep track without real names and emails.
If you have a pending order with us for coil covers and/or caps we have already sent you an email.

- Must receive at least 20 orders to begin production
- Offering the Billet/Carbon style only (see pics)
- Price is $550
- Can laser mark your car name, VIN and year for additional $100 (see pics, space is limited)
- Cannot start production until at least 20 orders are received so we cannot guarantee when they will be completed
- Apologies for the poor quality and limited number of pictures. We did these several years ago and were not set up for professional pics.

Thank you for your interest and support!
P321

Hummm.. Helenor and Hellboy sill plate,, I wonder who those are for,,, ??? I know Sam you are probably cussing me right about now ,,,

On the sill plates: A little detail on how to install? Do they stick over the factory ones?

The Project 321 sill plates will go over the stock ones but they look the best if you remove them.They fit more recessed in the channel.
The project 321 sills come with double sided tape. The tape is very strong. I did not use the tape. I used a few dabs of silicone which will allow easier removal in the future. I was involved with all of the Project 321 projects. We made the top of these sill plates with a rough brushed / sanded finish intentionally. If to d get some deep scratches or scuffs in these some 320 grit on a small hard block going with the brushed marks will take them out and look like new.. Thanks again Jake and Sam !! It is great you are taking the time to make these again !! Brian

[PROJECT321]

Brian, we could never curse you! You were the catalyst for our automotive line and we are forever grateful for that!

Hummm.. Helenor and Hellboy sill plate,, I wonder who those are for,,, ??? I know Sam you are probablly cussing me right about now ,,,


The Project 321 sill plates will go over the stock ones but they look the best if you remove them.They fit more recessed in the channel.
The project 321 sills come with double sided tape. The tape is very strong. I did not use the tape. I used a few dabs of silicone which will allow easier removal in the future. I was involved with all of the Project 321 projects. We made the top of these sill plates with a rough brushed / sanded finish intentionally. If to d get some deep scratches or scuffs in these some 320 grit on a small hard block going with the brushed marks will take them out and look like new.. Thanks again Jake and Sam !! It is great you are taking the time to make these again !! Brian