+ Reply to Thread
Results 1 to 7 of 7

Thread: Short-throw shifter + low-profile ball = MAX FUN!

  1. #1
    GT Owner/ B.o.D analogdesigner is on a distinguished road analogdesigner's Avatar
    Join Date
    Nov 2005
    Location
    San Clemente, CA USA
    Posts
    788

    Lightbulb Short-throw shifter + low-profile ball = MAX FUN! Now with images

    I finally installed my short-throw shifter today (25% less throw). I also used my low-profile shifter ball (15% less throw) www.gtsaver.com. I really like the feel of this, as it's almost half (about 63%) of the distance compared to the stock setup. The gear shift changes are quick and "clean." Sometimes I used to get a little bit of "gear clunk" when going into second, which is now gone. Now that the time constants are shorter between shifts, it seems to make my transmission much happier! This is a highly recommended setup. Installing the low-profile shift ball is easy, just a few minutes, however, the short-throw shifter takes considerable time and patience.






    MPEG video to come soon!

    Jay
    www.gtsaver.com
    Last edited by analogdesigner; 06-26-2006 at 02:42 AM.

  2. #2
    GT Owner BlackICE is on a distinguished road BlackICE's Avatar
    Join Date
    Nov 2005
    Location
    SF Bay Area in California
    Posts
    5,422

    Default

    Jay, to install Ford's short-throw shifter did you use the special shift alignment tools, or just trial and error?

    BlackICE

  3. #3
    GT Owner/ B.o.D analogdesigner is on a distinguished road analogdesigner's Avatar
    Join Date
    Nov 2005
    Location
    San Clemente, CA USA
    Posts
    788

    Lightbulb Shifter install question...

    BlackICE,

    The alignment tools are not needed because the new shifter's reference points are in the same location as the stock unit. This was by design (at least it should of been).

    This was worth the wait (it's the "cat's ass"). I have to go cruising in the AM and I will try to make an MPEG movie if I can get Gayle to hold the camera for me!

    Jay
    Quote Originally Posted by BlackICE
    Jay, to install Ford's short-throw shifter did you use the special shift alignment tools, or just trial and error?

    BlackICE
    Last edited by analogdesigner; 06-25-2006 at 02:54 AM.

  4. #4
    GT Owner abolfaz is on a distinguished road abolfaz's Avatar
    Join Date
    Jan 2006
    Location
    Coral Gables
    Posts
    825

    Default

    Video?

  5. #5
    GT Owner/ B.o.D analogdesigner is on a distinguished road analogdesigner's Avatar
    Join Date
    Nov 2005
    Location
    San Clemente, CA USA
    Posts
    788

    Lightbulb Link to video here...

    Quote Originally Posted by abolfaz
    Video?
    This is a short video of a quick test using my low-profile shifter ball with short-throw shifter. This is almost 40% less throw over the stock setup.

    FLASH VERSION:
    http://videos.streetfire.net/video/da8b42df-e49f-407d-973b-91727e2821ae.htm

    WINDOWS MEDIA VERSION:
    http://videos.streetfire.net/video/wm/da8b42df-e49f-407d-973b-91727e2821ae.htm

    Jay
    www.gtsaver.com

    https://www.shop.gtsaver.com/displayProductDocument.hg?productId=5&categoryId=3
    Last edited by analogdesigner; 07-02-2006 at 07:25 PM.

  6. #6
    GT Owner ViperJoe is on a distinguished road ViperJoe's Avatar
    Join Date
    Aug 2006
    Location
    Suburban Philadelphia
    Posts
    1,014

    Default

    Quote Originally Posted by analogdesigner
    This is almost 40% less throw over the stock setup.
    The website indicates a 15% reduction. Which is correct?

  7. #7
    Yeah, I've got one. FlorIdaho Chris is on a distinguished road FlorIdaho Chris's Avatar
    Join Date
    Aug 2005
    Location
    Palm Beach County, FL & Bonner's Ferry, ID
    Posts
    2,206

    Default

    Quote Originally Posted by ACRJoe
    The website indicates a 15% reduction. Which is correct?
    15% is just with the shift ball. The 40% reduction came from the shift ball AND the short shift kit.
    Annoy a liberal- work hard, get rich.


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts