Close

Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Le Mans 2010 Sponsor pe2unia's Avatar
    Join Date
    Dec 2006
    Location
    Maryland, Boynton Beach Fl, Bethany Beach Delaware
    Posts
    2,734

    Default Billet oil filter cap cover

    I know you guys are getting tired of the billet bling that our machinist is bringing to the table but with the economy as bad as its been he has been pretty bored so he has been making plenty of stuff for us. Here is an oil filter cap cover that we had done and it has several purposes. 1. BLING 2. an easier way to remove the cap when doing the oil change. 3. avoid dinging up the OEM cap when doing oil changes.

    Picture 1 is the cover without the OEM cap inserted
    Picture 2 is with the center cap removed showing the 3/8" square hole so you can insert your 3/8" extension to remove the cap without scaring the OEM plastic
    Picture 3 is with the OEM cap installed inside of the bling
    Picture 4 & 5 are with the cap installed on the car. The way this cap works is you slide the new bling over your OEM cap and tighten all the outer allen screws as this process tightens the bling to the cap nice and snug.


    OK you can tell me what you really think
    Attached Images Attached Images      
    06 Ford GT Black with silver stripes #1666 Pe2unia
    05 Ford GT Yellow stripe delete #0244 TT Mellow Yellow
    2013 Shelby GT 500 Grabber Blue
    1941 Ford Panel with a blown 351 Windsor
    1961 F-100 Uni-body 427 FE with dual quads
    1965 F-100 step side 460 EFI Yellow Flash
    2007 & 2010 SEMA dinner, Rally IV, Rally V, Rally VI, VII
    Host: 1st, 2nd, 3rd, 4th, 5th, 6th, & 7th annual GT Guy's coming to Maryland
    Rally IV, V, VI, VII, & IX attendee
    2011 Mojave mile 213.5 mph (3.90 gears)

  2. #2
    Le Mans 2010 Sponsor pe2unia's Avatar
    Join Date
    Dec 2006
    Location
    Maryland, Boynton Beach Fl, Bethany Beach Delaware
    Posts
    2,734

    Default

    Here are a couple of other pictures
    Attached Images Attached Images    
    06 Ford GT Black with silver stripes #1666 Pe2unia
    05 Ford GT Yellow stripe delete #0244 TT Mellow Yellow
    2013 Shelby GT 500 Grabber Blue
    1941 Ford Panel with a blown 351 Windsor
    1961 F-100 Uni-body 427 FE with dual quads
    1965 F-100 step side 460 EFI Yellow Flash
    2007 & 2010 SEMA dinner, Rally IV, Rally V, Rally VI, VII
    Host: 1st, 2nd, 3rd, 4th, 5th, 6th, & 7th annual GT Guy's coming to Maryland
    Rally IV, V, VI, VII, & IX attendee
    2011 Mojave mile 213.5 mph (3.90 gears)

  3. #3

    Default

    Damn you John. Quit tempting us to blow more money on bling! :)

  4. #4
    HERITAGE GT OWNER Superfly's Avatar
    Join Date
    Jun 2008
    Location
    Edmonton, Alberta
    Posts
    2,210

    Default

    Quote Originally Posted by pe2unia View Post
    .... with the economy as bad as its been .......

    OK you can tell me what you really think
    Dammit John, THE ECONOMY IS BAD.

    OK, how much?

  5. #5

    Default

    How much? I think I need one!
    Kenric
    '03 Lamborghini Murcielago
    '05 Black stripe delete GT 766rwhp
    Mclaren 650S spider
    458 Ferrari
    991 GT3RS
    Porsche 996 turbo GT700
    488GTB on order

  6. #6
    Le Mans 2010 Sponsor pe2unia's Avatar
    Join Date
    Dec 2006
    Location
    Maryland, Boynton Beach Fl, Bethany Beach Delaware
    Posts
    2,734

    Default

    OK Guys, I just got off the phone with the machinist and he would like to move at least 10 of them if at all possible so that he can recoup some engineering & development cost. The GT Guys will get the first one on Monday or Tuesday so Rich will chime in at some point with his opinion but these covers are AWESOME The machine time is close to 4 hours to do each part so He has priced them at $250 (edited 10/27/09) plus shipping and handling (which I will get that cost sometime during the first of the week). Some folks may want to powder coat or anodize them so with enough requests he will entertain this process as well. I will start a list for members that would like to commit to purchase on the first post of this thread and please let me know your thoughts of this piece whether it be positive or negative.
    Last edited by pe2unia; 10-27-2009 at 09:23 AM.
    06 Ford GT Black with silver stripes #1666 Pe2unia
    05 Ford GT Yellow stripe delete #0244 TT Mellow Yellow
    2013 Shelby GT 500 Grabber Blue
    1941 Ford Panel with a blown 351 Windsor
    1961 F-100 Uni-body 427 FE with dual quads
    1965 F-100 step side 460 EFI Yellow Flash
    2007 & 2010 SEMA dinner, Rally IV, Rally V, Rally VI, VII
    Host: 1st, 2nd, 3rd, 4th, 5th, 6th, & 7th annual GT Guy's coming to Maryland
    Rally IV, V, VI, VII, & IX attendee
    2011 Mojave mile 213.5 mph (3.90 gears)

  7. #7
    GT Owner
    Join Date
    Aug 2008
    Location
    Hollywood MD
    Posts
    134

    Default Guys this is a must have

    You really need to see this in person. This is truly a work of ART. Its makes the cover alot easier to get on and off, and it looks BAD ASSSSSSSSSS.
    Last edited by KDO GT; 10-27-2009 at 03:25 PM.

  8. #8
    Le Mans 2010 Sponsor pe2unia's Avatar
    Join Date
    Dec 2006
    Location
    Maryland, Boynton Beach Fl, Bethany Beach Delaware
    Posts
    2,734

    Default

    After further review from our machinist and the lack of interest he has decided to reduce the price on the billet oil filter cap to $250 plus shipping so that he can move the eight pieces that he made. If anyone is interested please let me know
    06 Ford GT Black with silver stripes #1666 Pe2unia
    05 Ford GT Yellow stripe delete #0244 TT Mellow Yellow
    2013 Shelby GT 500 Grabber Blue
    1941 Ford Panel with a blown 351 Windsor
    1961 F-100 Uni-body 427 FE with dual quads
    1965 F-100 step side 460 EFI Yellow Flash
    2007 & 2010 SEMA dinner, Rally IV, Rally V, Rally VI, VII
    Host: 1st, 2nd, 3rd, 4th, 5th, 6th, & 7th annual GT Guy's coming to Maryland
    Rally IV, V, VI, VII, & IX attendee
    2011 Mojave mile 213.5 mph (3.90 gears)

  9. #9
    *Supporting Vendor* GT Owner thegtguy's Avatar
    Join Date
    Apr 2006
    Location
    MI
    Posts
    462

    Default Billet Oil Filter Cap

    Finally had a chance to put this on today. It looks really good on the car and it goes with my flat black and chrome theme. Very nice piece and I think it looks like the optional BBS wheels a little bit. Nice piece John.
    Attached Images Attached Images  

    Rich Brooks
    734-658-9498
    richgtguy@gmail.com

  10. #10

    Default

    Very nice. Looks cool and functional! Put me down for one, please!

    michael
    2006 Midnight Blue w/stripes
    http://atspeedimages.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •