Recent content by andreikoc

If you have ever exploded a flywheel you might think differently. Cars with this much punch can do this. I have. Broke the bellhousing bolt mounts off the block and made engine into a paper weight.

Luggage Clips Available at Ford for $5 for 4

If you get the image email it to me. I am a pretty good Illustrator jockey.

This is to DBK: I have fabbed 21 license holders to sell to the forum members for $100 each, my cost is above $50. Do I need to do something with the forum to be able to do this? This is more of a service than anything else. I have posted the plans for anyone who wants to fab their own.

Would it be best to buy two that can construct one with mostly wrench work?

SteveA has it right. Just find a pristine magazine to scan.

Ford makes a short shifter I recommend.

I have 2011 Porsche 911 Turbos S with PDK. Really hard to beat and doesn't attract too much LEO. Blindingly quick 0-60 in under 3 seconds, completely docile with great AC.

Fast Freddy: YouTube link not working.

Said I would never do this without enuf orders but we are fabbing a dozen.

OK, here is how I see it: 1). Acquire 6061 sheet $5.00 per 2). Take to shear 45 min @ $20=$15/10= 1.50 per 3). Shear $5.00 per 4). Fabricate plan view 20 min@ $20/hr=$8.00 per 5). Satin finish 15 min@$20= $7.00 6). Brake $5.00 per 7). Take to anodize and pickup 1hr@ $20/10 =$2.00 8)...

If 10 want the front license holders shown in the beginning of the thread I will make them. Otherwise no.

This weekend will find the discrepancy. Done this before

I have used Wheel Enhancement in Culver City for Porsches for 30 years. They are impeccable. I am sure they would do GT wheels.

Be sure to insist that only plastic tools (like kitchenware) are used to removed old weights. Bring your own tool. I have had this happen too when a bozo uses screwdriver to remove weights and old adhesive. Might consider your own solvent too.